[AG-TECH] Starting VIC & RAT manually

[Derek Piper]

	Are they really on the same IP? Quite often (as far as I have seen) 
video and audio are on different IPs. Are they receiving your video? 
Also, make sure you don't have 'mute new sources' selected in VIC too. 
If they are receiving your video stream, but you get no other streams 
(grey or otherwise) in vic, then it may mean that it's a firewall issue 
on your end.

	Derek

Wachtel, Robert L wrote:
> This has gotten us part way there.
> 
>  
> 
> Actually there are two separate videoservice directories 
> videoproducerservice and videoconsumerservice. It does not seem to 
> matter which is run to launch the VIC to participate in the session.
> 
>  
> 
> I am able to launch RAT and have good bidirectional audio with the 
> group. The VIC however seems to not recognize the incoming video from 
> the group. I can send video from my Logitec USB camera but cannot receive.
> 
>  
> 
> Further thoughts would be appreciated.
> 
>  
> 
> Bob W.
> 
> 243-2857
> 
> ------------------------------------------------------------------------
> 
> *From:* Nagykaldi, Zsolt F. (HSC) [mailto:Zsolt-Nagykaldi at ouhsc.edu]
> *Sent:* Monday, November 07, 2005 9:29 AM
> *To:* Wachtel, Robert L; ag-tech at mcs.anl.gov
> *Subject:* RE: [AG-TECH] Starting VIC & RAT manually
> 
>  
> 
>  
> 
> Go to C:\Documents and Settings\<your username>\Application 
> Data\AccessGrid\local_services\AudioService
> 
>  
> 
> rat.exe -t 127 233.14.223.22/57014
> 
>  
> 
> Then cd to C:\Documents and Settings\<your username>\Application 
> Data\AccessGrid\local_services\VideoService
> 
>  
> 
> vic.exe -t 127 233.14.223.22/57016 
> 
>  
> 
>  
> 
> I am not sure inSORS allows you to jump on board like that, without 
> using their interface. If this works, let me know.
> 
>  
> 
> Zsolt
> 
>  
> 
> _ _ _
> 
>  
> 
> Zsolt Nagykaldi, PhD
> 
> Research Associate, Clinical IT Specialist
> 
> University Of Oklahoma Health Sciences Center
> 
> Department Of Family And Preventive Medicine
> 
> Oklahoma Center For Family Medicine Research
> 
>  
> 
> 900 NE 10th Street
> 
> Oklahoma City, OK 73104
> 
> Phone: (405) 271-8000 Ext.:1-32212
> 
> Fax:     (405) 271-1682
> 
>  
> 
> ------------------------------------------------------------------------
> 
> *From:* owner-ag-tech at mcs.anl.gov on behalf of Wachtel, Robert L
> *Sent:* Mon 11/7/2005 9:45 AM
> *To:* ag-tech at mcs.anl.gov
> *Subject:* [AG-TECH] Starting VIC & RAT manually
> 
> I am anticipating the need to have some AGTk2.4 users join sessions 
> initiated through our inSORS venue server to any one of four venues we 
> host at The University of Montana. I know that I have seen references on 
> this list regarding starting the VIC & RAT manually to join an existing 
> session but I have not found sufficient detail to allow me to 
> successfully connect to one of these sessions.
> 
>  
> 
> Environment:
> 
> Dell Optiplex GX280
> 
> Windows XP SP2
> 
> AGTk 2.4 fully functional via Venue Client
> 
>  
> 
> Session being configured by inSORS venue server:
> 
> IP 233.14.223.22            Video port 57016           Audio port 57014
> 
>  
> 
> Please provide exact syntax for command entry.
> 
>  
> 
> Thanks in advance,
> 
> Bob Wachtel
> 
> Director, Presentation & Technology Services
> 
> The University of Montana
> 
> Missoula, MT 59812
> 
>  
> 
> phone: 406-243-2857
> 
> cell phone 406-396-1192
> 
> fax: 406-243-2689
> 
>  
> 

-- 
Derek Piper - dcpiper at indiana.edu - (812) 856 0111
IRI 323, School of Informatics
Indiana University, Bloomington, Indiana