[AG-TECH] Starting VIC & RAT manually
Wachtel, Robert L
Robert.Wachtel at mso.umt.edu
Mon Nov 7 11:56:21 CST 2005
This has gotten us part way there.
Actually there are two separate videoservice directories
videoproducerservice and videoconsumerservice. It does not seem to
matter which is run to launch the VIC to participate in the session.
I am able to launch RAT and have good bidirectional audio with the
group. The VIC however seems to not recognize the incoming video from
the group. I can send video from my Logitec USB camera but cannot
receive.
Further thoughts would be appreciated.
Bob W.
243-2857
________________________________
From: Nagykaldi, Zsolt F. (HSC) [mailto:Zsolt-Nagykaldi at ouhsc.edu]
Sent: Monday, November 07, 2005 9:29 AM
To: Wachtel, Robert L; ag-tech at mcs.anl.gov
Subject: RE: [AG-TECH] Starting VIC & RAT manually
Go to C:\Documents and Settings\<your username>\Application
Data\AccessGrid\local_services\AudioService
rat.exe -t 127 233.14.223.22/57014
Then cd to C:\Documents and Settings\<your username>\Application
Data\AccessGrid\local_services\VideoService
vic.exe -t 127 233.14.223.22/57016
I am not sure inSORS allows you to jump on board like that, without
using their interface. If this works, let me know.
Zsolt
_ _ _
Zsolt Nagykaldi, PhD
Research Associate, Clinical IT Specialist
University Of Oklahoma Health Sciences Center
Department Of Family And Preventive Medicine
Oklahoma Center For Family Medicine Research
900 NE 10th Street
Oklahoma City, OK 73104
Phone: (405) 271-8000 Ext.:1-32212
Fax: (405) 271-1682
________________________________
From: owner-ag-tech at mcs.anl.gov on behalf of Wachtel, Robert L
Sent: Mon 11/7/2005 9:45 AM
To: ag-tech at mcs.anl.gov
Subject: [AG-TECH] Starting VIC & RAT manually
I am anticipating the need to have some AGTk2.4 users join sessions
initiated through our inSORS venue server to any one of four venues we
host at The University of Montana. I know that I have seen references on
this list regarding starting the VIC & RAT manually to join an existing
session but I have not found sufficient detail to allow me to
successfully connect to one of these sessions.
Environment:
Dell Optiplex GX280
Windows XP SP2
AGTk 2.4 fully functional via Venue Client
Session being configured by inSORS venue server:
IP 233.14.223.22 Video port 57016 Audio port 57014
Please provide exact syntax for command entry.
Thanks in advance,
Bob Wachtel
Director, Presentation & Technology Services
The University of Montana
Missoula, MT 59812
phone: 406-243-2857
cell phone 406-396-1192
fax: 406-243-2689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/ag-tech/attachments/20051107/2fc5c6c1/attachment.htm>
More information about the ag-tech
mailing list