[AG-TECH] Black Magic Intensity Pro, Panasonic AG-HMC150 & AGtk 3.2

[Jimmy Miklavcic]

Okay, I figured out that the vic settings works best for me at 720/59.94 and the camera set to 720/60p. I'm still getting the invalid command name """"" error.  I also found out that one of the cables is bad.

Jimmy

From: ag-tech-bounces at lists.mcs.anl.gov [mailto:ag-tech-bounces at lists.mcs.anl.gov] On Behalf Of Jimmy Miklavcic
Sent: Saturday, January 29, 2011 6:38 PM
To: ag-tech at lists.mcs.anl.gov
Subject: [AG-TECH] Black Magic Intensity Pro, Panasonic AG-HMC150 & AGtk 3.2

I have a Blackmagic Intensity Pro HDMI Card, in a system with Windows XP and a Panasonic AGHMC150 camera. I've install Blackmagic drivers 7.94. When I set the cameras to 720/30p I get black, when I set the camera to 1080/60i I get nothing at all. I have set the service parameters in the node configuration to match the cameras output but no video.

I have this same configuration on two similar systems. On one, I get the application error when vic starts up that states - invalid command """". On the other system I don't see that error.

Does anyone have any insight into what might be going on?

Thanks,
Jimmy

Jimmy Miklavcic
Multimedia Specialist
University of Utah CHPC
155 S 1452 E RM 405
Salt Lake City, UT 84112
801-585-9335

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/ag-tech/attachments/20110129/3a07eede/attachment.htm>