[AG-TECH] Multiple Blackmagic Cards - One more Question

[John I. Quebedeaux, Jr]

I too thought I could only get one out of the camera at a time... Had to
manually switch... 

-John Q.


> From: Christoph Willing <c.willing at uq.edu.au>
> Date: Thu, 2 Sep 2010 07:10:49 +1000
> To: "Tellekson, Eric G." <eric.tellekson at sdstate.edu>
> Cc: AG-TECH list <ag-tech at mcs.anl.gov>
> Subject: Re: [AG-TECH] Multiple Blackmagic Cards - One more Question
> 
> 
> On 02/09/2010, at 5:33 AM, Tellekson, Eric G. wrote:
> 
>> Todd,
>> Here is our combination @ South Dakota State University.
>> - Sony EVI-HD1 @ 3
>> - Blackmagic Decklink SDI cards @ 3
>> 
>> We simultaneously use the HD-SDI out of the cameras to the black
>> magic cards as well as the HD-Component out and down convert it to
>> NTSC Composite into a Viewcast Osprey 440.
> 
> 
> Eric,
> 
> Could you confirm that you're deriving both HD-SDI and HD-Component
> from the camera at the same time? I had a loan of a Sony EVI-HDI and
> found that the different output formats were only switchable i.e. only
> one format at a time. Maybe the one I had was an older one ....
> 
> 
> chris
> 
> 
>> -----Original Message-----
>> From: ag-tech-bounces at lists.mcs.anl.gov
>> [mailto:ag-tech-bounces at lists.mcs.anl.gov
>> ] On Behalf Of Todd Zimmerman
>> Sent: Wednesday, September 01, 2010 1:03 PM
>> Cc: ag-tech at mcs.anl.gov
>> Subject: [AG-TECH] Multiple Blackmagic Cards - One more Question
>> 
>> Sorry all - one more question.
>> 
>> What combination of camera/Blackmagic card are you all using?
>> 
>> Todd
>> 
>> 
>> -- 
>> Collaboration & Visualization Specialist
>> UBC Okanagan ITServices - http://web.ubc.ca/okanagan/itservices/
>> WestGrid - http://www.westgrid.ca
>> Compute Canada - http://computecanada.org
>> Todd Zimmerman | 250.807.9979 | todd.zimmerman at ubc.ca
> 
> Christoph Willing                       +61 7 3365 8316
> QCIF Access Grid Manager
> University of Queensland
>