[AG-TECH] Bridge question.

[Jimmy Miklavcic]

We are running our own bridge, on Red Hat,here at Utah. It runs on the same subnet as my AG system. I activate unicast and select our bridge (UTAH_CHPC) the venue client does not reset the vic and rat as it normally does when I select other bridges. So I force the update by selecting GO. When I do this, usually I will se the IP address of the bridge in the vic and rat windows, but for our bridge, I see a multicast address. So now I'm really confused.

Has anyone run into this symptom at all? Could someone test this out from the outside. Our bridge is registered and the IP is 155.101.28.50.

Thanks,

Jimmy


 --
Jimmy Miklavcic
Multimedia Specialist
Jimmy.Miklavcic at utah.edu<mailto:Jimmy.Miklavcic at utah.edu>

UNIVERSITY OF UTAH
CTR FOR HIGH PERFORM COMPUTING
155 SOUTH 1452 EAST RM 405
SALT LAKE CITY, UT 84112-0190

Office: 801.585.9335
 Fax: 801.585.5366

http://www.anotherlanguage.org<http://www.anotherlanguage.org/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/ag-tech/attachments/20091005/4b2247ad/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Blank Bkgrd.gif
Type: image/gif
Size: 145 bytes
Desc: Blank Bkgrd.gif
URL: <http://lists.mcs.anl.gov/pipermail/ag-tech/attachments/20091005/4b2247ad/attachment.gif>