[AG-TECH] 2.4 and 3.0 Bridge servers

[Thomas D. Uram]

I can confirm that Andrew was right on this point.  We have run AG2 and 
AG3 bridge
servers on the same machine all along.  Just make sure the port ranges 
don't overlap.

Tom


On 9/27/06 3:18 AM, Andrew A Rowley wrote:
> Hi,
>
> I would think that you can run both bridges on the same machine, but it would be best to make sure that the UDP port ranges don't clash for the different bridges.  I may be wrong however...
>
> Andrew :)
>
> ============================================
> Access Grid Support Centre,
> RSS Group,
> Manchester Computing,
> Kilburn Building,
> University of Manchester,
> Oxford Road,
> Manchester, 
> M13 9PL, 
> UK
> Tel: +44(0)161-275 0685
> Email: Andrew.Rowley at manchester.ac.uk 
>
>   
>> -----Original Message-----
>> From: owner-ag-tech at mcs.anl.gov [mailto:owner-ag-tech at mcs.anl.gov] On
>> Behalf Of Jeremy Mann
>> Sent: 26 September 2006 16:41
>> To: ag-tech at mcs.anl.gov
>> Subject: [AG-TECH] 2.4 and 3.0 Bridge servers
>>
>> I take it you can't run both Bridge servers on the same machine?
>>
>> --
>> Jeremy
>>
>>     
>
>
>