multiple capture under NT
Robert Olson
olson at mcs.anl.gov
Tue Jul 25 15:47:28 CDT 2000
Can't you have the operator console run vic and look at the network video?
--bob
At 03:20 PM 7/25/2000 -0500, George Estes wrote:
>Bob,
>
> Jay should have given more of an explanation. What we want to do is
>this. One of our operator stations is in a little room off the main AG
>room, so it is somewhat difficult for the operator to see the screens and
>pick out the local windows when camera movements are necessary. We control
>the cameras with software and so it would be good to see the local windows
>on the control monitor. One thought was to slit the video signal coming
>from the cameras into video capture cards on the control machine, so three
>video windows for the operator to track the video cameras. We are also
>open to other suggestions.
>
>George
>
>At 03:07 PM 7/25/00 -0500, you wrote:
> >Why do you want to do this? This is one of the major reasons that the video
> >capture machine runs Linux. Multiple capture works very reliably there.
> >
> >--bob
> >
> > >Has anyone been able to get multiple capture cards working under
> > >Windows NT? If so, which models? Thanks,
> >
> >
More information about the ag-tech
mailing list