[Nek5000-users] Reynolds for pipe
nek5000-users at lists.mcs.anl.gov
nek5000-users at lists.mcs.anl.gov
Thu Oct 26 09:33:53 CDT 2017
Hi ZJ,
rho = p01 = rho
mu = p02 (or, if p02 < 0, then mu = 1/| p02 | )
and your Reynolds number will be
Re_D = rho Ubar / (D mu)
How this translates into shear Re depends on the Reynolds
number you are running. An approximate formula:
Re_τ = 0.123 Re_D^ 0.875
hth
Paul
________________________________
From: Nek5000-users <nek5000-users-bounces at lists.mcs.anl.gov> on behalf of nek5000-users at lists.mcs.anl.gov <nek5000-users at lists.mcs.anl.gov>
Sent: Thursday, October 26, 2017 7:57 AM
To: nek5000-users at lists.mcs.anl.gov
Subject: [Nek5000-users] Reynolds for pipe
Hi,
May I know for shear Reynolds number (Re_t) equals to 361, whether setting p02 VISCOS in rea file to be -11700 and the pipe radius equals to 1 in the mesh part is correct.
Kind regards,
ZJ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20171026/118c0a30/attachment.html>
More information about the Nek5000-users
mailing list