[Nek5000-users] lx1 ly1 lz1 not match

[nek5000-users at lists.mcs.anl.gov]

Yes, I did a nek10s. It works all fine.

Thanks,
Chu

2015-03-30 17:24 GMT-05:00 <nek5000-users at lists.mcs.anl.gov>:

>
>  Hi Chu,
>
>  Does the "vortex" example run for you?
>
>  Paul Fischer
>
>  ------------------------------
> *From:* nek5000-users-bounces at lists.mcs.anl.gov [
> nek5000-users-bounces at lists.mcs.anl.gov] on behalf of
> nek5000-users at lists.mcs.anl.gov [nek5000-users at lists.mcs.anl.gov]
> *Sent:* Monday, March 30, 2015 5:06 PM
> *To:* nek5000-users
>
> *Subject:* Re: [Nek5000-users] lx1 ly1 lz1 not match
>
>   Hi everyone,
>
>  I did try a few times, but the problem persists. Any idea what's going
> on?
>
> Thanks,
> Chu
>
> 2015-03-30 6:53 GMT-05:00 <nek5000-users at lists.mcs.anl.gov>:
>
>> the other location where you should set the dimensionality is the third
>> line of the rea file (ndim), but Nek checks whether ldim is the same as
>> ndim before the error message you mention. Otherwise your snippet looks
>> good.
>> Philipp
>>
>> On 2015-03-30 00:55, nek5000-users at lists.mcs.anl.gov wrote:
>> > Hi,
>> >
>> > I have already set ldim = 3 and lx1=ly1=lz1 here. Is there anything
>> > wrong here?
>> >
>> >       parameter (ldim=3)
>> >       parameter (lx1=12,ly1=lx1,lz1=lx1,lelt=100,lelv=lelt)
>> >       parameter (lxd=18,lyd=lxd,lzd=lxd)
>> >       parameter (lelx=1,lely=1,lelz=1)
>> >
>> > Thanks,
>> > Chu
>> >
>> >
>> > 2015-03-29 17:45 GMT-05:00 <nek5000-users at lists.mcs.anl.gov
>> > <mailto:nek5000-users at lists.mcs.anl.gov>>:
>> >
>> >     Yes, exactly -- I would recommend, Chu, to start from a 3D example
>> >     case, like SIZE for turbChannel
>> >
>> >     Aleks
>> >     ________________________________________
>> >     From: nek5000-users-bounces at lists.mcs.anl.gov
>> >     <mailto:nek5000-users-bounces at lists.mcs.anl.gov>
>> >     [nek5000-users-bounces at lists.mcs.anl.gov
>> >     <mailto:nek5000-users-bounces at lists.mcs.anl.gov>] on behalf of
>> >     nek5000-users at lists.mcs.anl.gov
>> >     <mailto:nek5000-users at lists.mcs.anl.gov>
>> >     [nek5000-users at lists.mcs.anl.gov
>> >     <mailto:nek5000-users at lists.mcs.anl.gov>]
>> >     Sent: Sunday, March 29, 2015 5:04 PM
>> >     To: nek5000-users at lists.mcs.anl.gov
>> >     <mailto:nek5000-users at lists.mcs.anl.gov>
>> >     Subject: Re: [Nek5000-users] lx1 ly1 lz1 not match
>> >
>> >     Hi,
>> >     you need to set ldim=2 in the SIZE file for a 2D case, or - if you
>> want
>> >     3D - set lz1=12.
>> >
>> >     Best regards,
>> >     Philipp
>> >
>> >     On 2015-03-29 23:58, nek5000-users at lists.mcs.anl.gov
>> >     <mailto:nek5000-users at lists.mcs.anl.gov> wrote:
>> >     > Hi,
>> >     >
>> >     > I am currently running a case, which gives me this error. Does
>> anyone
>> >     > know which part of .rea it belongs to?
>> >     >
>> >     > read .rea file
>> >     > ERROR: lx1,ly1,lz1:   12   12    1 must be equal for 3D
>> >     >
>> >     > I have checked in SIZE and the parameters match there. I don't
>> know
>> >     > where they are in .rea
>> >     >
>> >     > Thanks,
>> >     > Chu
>> >     >
>> >     >
>> >     > _______________________________________________
>> >     > Nek5000-users mailing list
>> >     > Nek5000-users at lists.mcs.anl.gov
>> >     <mailto:Nek5000-users at lists.mcs.anl.gov>
>> >     > https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> >     >
>> >     _______________________________________________
>> >     Nek5000-users mailing list
>> >     Nek5000-users at lists.mcs.anl.gov <mailto:
>> Nek5000-users at lists.mcs.anl.gov>
>> >     https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> >     _______________________________________________
>> >     Nek5000-users mailing list
>> >     Nek5000-users at lists.mcs.anl.gov <mailto:
>> Nek5000-users at lists.mcs.anl.gov>
>>  >     https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > Nek5000-users mailing list
>> > Nek5000-users at lists.mcs.anl.gov
>> > https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> >
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>>
>
>
> _______________________________________________
> Nek5000-users mailing list
> Nek5000-users at lists.mcs.anl.gov
> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20150330/eb1f672c/attachment-0001.html>