From Majordomo at mcs.anl.gov Sun Jun 13 03:01:50 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sun, 13 Jun 2004 03:01:50 -0500 Subject: Majordomo results: Re: Document Message-ID: <200406130801.i5D81oc77170@mcs.anl.gov> -- >>>> ----------wqgqftnayuqytyzmctit **** Command '----------wqgqftnayuqytyzmctit' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Sun Jun 13 14:38:13 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sun, 13 Jun 2004 14:38:13 -0500 Subject: Majordomo results: Re: Incoming Message Message-ID: <200406131938.i5DJcDP35112@mcs.anl.gov> -- >>>> ----------qswnupyoqrbyonozqywu **** Command '----------qswnupyoqrbyonozqywu' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Mon Jun 14 09:16:08 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Mon, 14 Jun 2004 09:16:08 -0500 Subject: Majordomo results: RE: Text message Message-ID: <200406141416.i5EEG8X121290@mcs.anl.gov> -- >>>> ----------wnlpkkqysyhuaamtdxdh **** Command '----------wnlpkkqysyhuaamtdxdh' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Mon Jun 14 13:14:32 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Mon, 14 Jun 2004 13:14:32 -0500 Subject: Majordomo results: Site changes Message-ID: <200406141814.i5EIEWu53444@mcs.anl.gov> -- >>>> ----------cmktcjkiczwahtserrfa **** Command '----------cmktcjkiczwahtserrfa' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Wed Jun 16 12:12:37 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Wed, 16 Jun 2004 12:12:37 -0500 Subject: Majordomo results: Changes.. Message-ID: <200406161712.i5GHCbu51282@mcs.anl.gov> -- >>>> ----------tixcldspfippcifpxcye **** Command '----------tixcldspfippcifpxcye' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Thu Jun 17 08:50:32 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Thu, 17 Jun 2004 08:50:32 -0500 Subject: Majordomo results: Forum notify Message-ID: <200406171350.i5HDoWR40400@mcs.anl.gov> -- >>>> ----------jlqebqwhqaqjnnbngxrl **** Command '----------jlqebqwhqaqjnnbngxrl' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Thu Jun 17 09:32:08 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Thu, 17 Jun 2004 09:32:08 -0500 Subject: Majordomo results: RE: Message Notify Message-ID: <200406171432.i5HEW8c90448@mcs.anl.gov> -- >>>> ----------jfivatefygrlcljzzcgc **** Command '----------jfivatefygrlcljzzcgc' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Thu Jun 17 15:17:38 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Thu, 17 Jun 2004 15:17:38 -0500 Subject: Majordomo results: RE: Incoming Msg Message-ID: <200406172017.i5HKHcB116626@mcs.anl.gov> -- >>>> ----------rjsfivmxlhnadytfpxbr **** Command '----------rjsfivmxlhnadytfpxbr' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From rob at terizla.org Fri Jun 18 16:26:18 2004 From: rob at terizla.org (Rob Latham) Date: Fri, 18 Jun 2004 16:26:18 -0500 Subject: precision woes fixed? Message-ID: <20040618212617.GA14475@terizla.org> Hi Have you fixed the precision woes reported earlier this year? -- Rob Latham Chicago, IL USA From robl at mcs.anl.gov Fri Jun 18 16:34:13 2004 From: robl at mcs.anl.gov (Robert Latham) Date: Fri, 18 Jun 2004 16:34:13 -0500 Subject: precision woes fixed? In-Reply-To: <20040618212617.GA14475@terizla.org> References: <20040618212617.GA14475@terizla.org> Message-ID: <20040618213412.GP4691@mcs.anl.gov> On Fri, Jun 18, 2004 at 04:26:18PM -0500, Rob Latham wrote: > Have you fixed the precision woes reported earlier this year? Almost. We should have a new release soon. (Sorry for talking to myself. I'm trying to make the list subscriber-only, to combat spam. I've got some work to do...). -- Rob Latham Mathematics and Computer Science Division A215 0178 EA2D B059 8CDF Argonne National Labs, IL USA B29D F333 664A 4280 315B From Majordomo at mcs.anl.gov Sat Jun 19 03:49:47 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sat, 19 Jun 2004 03:49:47 -0500 Subject: Majordomo results: Re: Thanks :) Message-ID: <200406190849.i5J8nlt37806@mcs.anl.gov> -- >>>> ----------kfiuicqsvdbhztdlmiir **** Command '----------kfiuicqsvdbhztdlmiir' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Sat Jun 19 05:57:42 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sat, 19 Jun 2004 05:57:42 -0500 Subject: Majordomo results: Incoming message Message-ID: <200406191057.i5JAvgT72350@mcs.anl.gov> -- >>>> ----------bvtvfhjlqfqrsgsiauyt **** Command '----------bvtvfhjlqfqrsgsiauyt' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Sat Jun 19 07:28:28 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sat, 19 Jun 2004 07:28:28 -0500 Subject: Majordomo results: Re: Hi Message-ID: <200406191228.i5JCSS8119364@mcs.anl.gov> -- >>>> ----------tgtzjgsuyxnapomypwsw **** Command '----------tgtzjgsuyxnapomypwsw' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From Majordomo at mcs.anl.gov Sat Jun 19 08:38:03 2004 From: Majordomo at mcs.anl.gov (Majordomo at mcs.anl.gov) Date: Sat, 19 Jun 2004 08:38:03 -0500 Subject: Majordomo results: RE: Message Notify Message-ID: <200406191338.i5JDc37115924@mcs.anl.gov> -- >>>> ----------uywuxvmbskaxzrydltvt **** Command '----------uywuxvmbskaxzrydltvt' not recognized. >>>> Content-Type: text/html; charset="us-ascii" **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> We do not process HTML mail Ending processing here **** Help for Majordomo at mcs.anl.gov: This help message is being sent to you from the Majordomo mailing list management system at Majordomo at mcs.anl.gov. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo at mcs.anl.gov". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo at mcs.anl.gov: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic at my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic at my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo at mcs.anl.gov. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo at mcs.anl.gov: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic at my-isp.com In either of these cases, you can tell Majordomo at mcs.anl.gov to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic at my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo at mcs.anl.gov: which Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner at mcs.anl.gov. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list at mcs.anl.gov, you would send mail to demo-list-approval at mcs.anl.gov. To get another copy of this help message, send mail to Majordomo at mcs.anl.gov with a line saying help in the message body. VII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as
, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe [
] Subscribe yourself (or
if specified) to the named . unsubscribe [
] Unsubscribe yourself (or
if specified) from the named . "unsubscribe *" will remove you (or
) from all lists. This _may not_ work if you have subscribed using multiple addresses. which [
] Find out which lists you (or
if specified) are on. who Find out who is on the named . info Retrieve the general introductory information for the named . intro Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo at mcs.anl.gov". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner at mcs.anl.gov". From robl at mcs.anl.gov Sat Jun 19 16:13:08 2004 From: robl at mcs.anl.gov (Robert Latham) Date: Sat, 19 Jun 2004 16:13:08 -0500 Subject: moving to subscriber-only list Message-ID: <20040619211308.GF28372@mcs.anl.gov> Hello As I'm sure you've noticed, we've gotten a lot of junk from 'Majordomo at mcs.anl.gov'. Spam programs are forging HTML mail from parallel-netcdf to Majordomo at mcs.anl.gov and majordomo is kindly replying to the (forged) address -- us. Well, the only good way to fix this and other spam is to make the list subscriber only. People will not be able to post to this list unless they are subscribed. I hope this does not cause any inconvieneince to anybody. If you feel strongly that it is better to have an open list (and possibly more spam), let me know. ==rob -- Rob Latham Mathematics and Computer Science Division A215 0178 EA2D B059 8CDF Argonne National Labs, IL USA B29D F333 664A 4280 315B