[Nek5000-users] mesh converter ICEM CFD to NEK5000

[nek5000-users at lists.mcs.anl.gov]

maybe only relevant to a few: The Python script mshconvert.py might 
still be interesting to groups that e.g. do not have access to the 
Exodus export filter in ICEM (like we...). In those cases, mshconvert.py 
does a good job to go from .msh to .rea (in 2D) and allows reasonably 
straightforward modification in case needed. 3D extrusion can then be 
done using n2to3.

Philipp

On 2018-07-19 13:51, nek5000-users at lists.mcs.anl.gov wrote:
> See workaround here: https://github.com/Nek5000/Nek5000/issues/502
> 
> 
> -----Original message-----
>> From:nek5000-users at lists.mcs.anl.gov <nek5000-users at lists.mcs.anl.gov>
>> Sent: Thursday 19th July 2018 11:01
>> To: nek5000-users <nek5000-users at lists.mcs.anl.gov>
>> Subject: Re: [Nek5000-users] mesh converter ICEM CFD to NEK5000
>>
>> I was facing a boundary condition problem using exo2nek.
>>
>> Did you solve that?
>>
>> Sijo
>>
>> -----------
>> De: "nek5000-users" <nek5000-users at lists.mcs.anl.gov>
>> À: "nek5000-users" <nek5000-users at lists.mcs.anl.gov>
>> Envoyé: Jeudi 19 Juillet 2018 10:52:24
>> Objet: Re: [Nek5000-users] mesh converter ICEM CFD to NEK5000
>>
>> Please use exo2nek which is distributed with the official release.
>>
>> On 19 Jul 2018, at 10:16, "nek5000-users at lists.mcs.anl.gov <mailto:nek5000-users at lists.mcs.anl.gov>" <nek5000-users at lists.mcs.anl.gov <mailto:nek5000-users at lists.mcs.anl.gov>> wrote:
>>
>> You can use a python script called mshconvert.py which is available in internet.
>>
>> It convert .msh to .rea
>>
>> Remember Periodic bc won't work with it.
>>
>> Sijo
>>
>> -----------
>> De: "nek5000-users" <nek5000-users at lists.mcs.anl.gov <mailto:nek5000-users at lists.mcs.anl.gov>>
>> À: "nek5000-users" <nek5000-users at lists.mcs.anl.gov <mailto:nek5000-users at lists.mcs.anl.gov>>
>> Envoyé: Jeudi 19 Juillet 2018 08:25:37
>> Objet: [Nek5000-users] mesh converter ICEM CFD to NEK5000
>>
>> Hi Neks,
>>
>>
>> I am trying to convert 2D ICEM CFD mesh to NEK5000. Could you tell me, which is the best way to convert grid? My geometry is a 2D cylinder and 2D ellipse with a rectangular domain for the simulation.
>>
>>
>>
>> -- 
>> Alok Mishra
>> Research Scholar
>> Aerospace Department IIT Kanpur
>>
>>
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov <mailto:Nek5000-users at lists.mcs.anl.gov>
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users <https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users>
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov <mailto:Nek5000-users at lists.mcs.anl.gov>
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users <https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users>
>>
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
> _______________________________________________
> Nek5000-users mailing list
> Nek5000-users at lists.mcs.anl.gov
> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>