[Nek5000-users] Export surface data only

[nek5000-users at lists.mcs.anl.gov]

Hi Rif,

I normally do the following:

Pick a velocity isosurface of magnitude  .0000001 (say)

Then plot your quantity of interest on this isoruface...

Paul

________________________________
From: nek5000-users-bounces at lists.mcs.anl.gov [nek5000-users-bounces at lists.mcs.anl.gov] on behalf of nek5000-users at lists.mcs.anl.gov [nek5000-users at lists.mcs.anl.gov]
Sent: Tuesday, April 05, 2016 9:10 AM
To: nek5000-users at lists.mcs.anl.gov
Subject: [Nek5000-users] Export surface data only

Hi Neks,
is there a way or can NEK export just the "walls' results". I am running a 3d airfoil simulation and want to look at the pressure distribution on the airfoil in VisIt. VisIt does not allow me to isolate the wall apparently so it's hard to look at the surface pressure. Thanks.


Rif
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20160405/18ca0878/attachment.html>