[Nek5000-users] Rayleigh example - no flow development
nek5000-users at lists.mcs.anl.gov
nek5000-users at lists.mcs.anl.gov
Thu May 7 21:32:06 CDT 2015
Hi Paul,
In my modified version, Ra = 5e7, Pr = 5. For the example, I keep it as the
original values Ra ~1700, Pr = 1.
Regards,
Simon
2015-05-07 21:25 GMT-05:00 <nek5000-users at lists.mcs.anl.gov>:
>
> Hi Simon,
>
> What is your Rayleigh number?
>
> Paul
>
> ------------------------------
> *From:* nek5000-users-bounces at lists.mcs.anl.gov [
> nek5000-users-bounces at lists.mcs.anl.gov] on behalf of
> nek5000-users at lists.mcs.anl.gov [nek5000-users at lists.mcs.anl.gov]
> *Sent:* Thursday, May 07, 2015 8:17 PM
> *To:* nek5000-use.
> *Subject:* [Nek5000-users] Rayleigh example - no flow development
>
> Dear all neks,
>
> Recently I have tried to modify the rayleigh example to my case.
> However, I discovered that no flow field is developed after a long time.
> All velocities are zero. I guess I miss something important in the example.
> Anyone knows which part of the code could lead to this?
>
> Also, although I start with T = -z, I got asymmetric initial condition,
> something not as I specified as viewed in postnek. Did I miss any point in
> the .rea and .usr? The files are attached here. They are modified rea and
> usr from rayleigh to my case.
>
> Thank you very much.
>
> Regards,
> Simon
>
> _______________________________________________
> Nek5000-users mailing list
> Nek5000-users at lists.mcs.anl.gov
> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20150507/04e2b8d3/attachment.html>
More information about the Nek5000-users
mailing list