[MOAB-dev] boundary nodes on parallel mesh

[Nico Schlömer]

Yes, these instructions [1] in code (perhaps even an example in the repo)
would be tremendously helpful.

Cheers,
Nico


[1] http://trac.mcs.anl.gov/projects/ITAPS/wiki/ParallelGeomSkin

On Mon, Nov 2, 2015 at 2:58 AM <jain at mcs.anl.gov> wrote:

> Hi Nico,
>
> Last year, we moved our old trac pages etc. to SIGMA page, here are the
> FAQs: http://sigma.mcs.anl.gov/moab/faq-moab/
> I'll add more questions with sample code to our FAQs, thanks.
> 'examples' and 'test' folders are the best places to look for code.
> Use doxygen page: http://ftp.mcs.anl.gov/pub/fathom/moab-docs/index.html for
> function definitions and user/developers guide.
>
> --
> Rajeev Jain
> Software Development Specialist
> MCS, Argonne National Laboratory
> 1134, Bldg 240, Chicago IL USA 60439
> O: 630-252-3176 Gmail: rajeeja
> GVoice 312-RAJ-EEV0 jain at mcs.anl.gov
>
> ------------------------------
> *From:* Nico Schlömer <nico.schloemer at gmail.com>
> *To:* Timothy Tautges <timothy.tautges at cd-adapco.com>
> *Cc:* "moab-dev at mcs.anl.gov" <moab-dev at mcs.anl.gov>
> *Sent:* Sunday, November 1, 2015 7:45 PM
> *Subject:* Re: [MOAB-dev] boundary nodes on parallel mesh
>
> Yes, that would be much appreciated! (I don't understand from the thread
> [1] what exactly the solution is. People talk about a fork of sorts, shared
> and owned filtering etc. A piece of code in the FAQs would help.)
>
> By the way, where do I find the FAQs? :)
>
> --Nico
>
> [1] http://lists.mcs.anl.gov/pipermail/moab-dev/2013/005509.html
>
> On Mon, Nov 2, 2015 at 2:40 AM Timothy Tautges <
> timothy.tautges at cd-adapco.com> wrote:
>
> Moab folks, this should be put in the faq if it isn't there already.
> On Nov 1, 2015 7:38 PM, "Timothy Tautges" <timothy.tautges at cd-adapco.com>
> wrote:
>
> I think that's still the way.
> - tim
> On Nov 1, 2015 7:27 PM, "Nico Schlömer" <nico.schloemer at gmail.com> wrote:
>
> Hi everyone,
>
> As I'm diving deeper into MOAB, more questions pop up. Right now: I need
> to loop over the actual physical boundary of a parallel mesh and get the
> node IDs and their coordinates.
>
> I found an old mailing list thread on the topic [1], but I'm not sure it
> was conclusive. What's the current best practice here?
>
> Cheers,
> Nico
>
> [1] http://lists.mcs.anl.gov/pipermail/moab-dev/2013/005509.html
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/moab-dev/attachments/20151102/9b172802/attachment.html>