[cgma-dev] CGMA check for *64-occ* failed.
Nightly Test
kraftche at cae.wisc.edu
Thu Mar 26 02:40:06 CDT 2009
Making check in compat
make[1]: Entering directory `/home/jason/cgm/test/64-occ/compat'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/compat'
Making check in util
make[1]: Entering directory `/home/jason/cgm/test/64-occ/util'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/util'
Making check in geom
make[1]: Entering directory `/home/jason/cgm/test/64-occ/geom'
Making check in .
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom'
make[2]: Nothing to be done for `check-am'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom'
Making check in Cholla
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom/Cholla'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom/Cholla'
Making check in facetbool
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom/facetbool'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom/facetbool'
Making check in facet
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom/facet'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom/facet'
Making check in virtual
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom/virtual'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom/virtual'
Making check in OCC
make[2]: Entering directory `/home/jason/cgm/test/64-occ/geom/OCC'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/geom/OCC'
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/geom'
Making check in init
make[1]: Entering directory `/home/jason/cgm/test/64-occ/init'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/init'
Making check in .
make[1]: Entering directory `/home/jason/cgm/test/64-occ'
make[1]: Leaving directory `/home/jason/cgm/test/64-occ'
Making check in itaps
make[1]: Entering directory `/home/jason/cgm/test/64-occ/itaps'
make check-recursive
make[2]: Entering directory `/home/jason/cgm/test/64-occ/itaps'
Making check in .
make[3]: Entering directory `/home/jason/cgm/test/64-occ/itaps'
make testgeom_occ
make[4]: Entering directory `/home/jason/cgm/test/64-occ/itaps'
make[4]: Leaving directory `/home/jason/cgm/test/64-occ/itaps'
make check-TESTS
make[4]: Entering directory `/home/jason/cgm/test/64-occ/itaps'
Using default input file: ../../trunk/itaps/../test/LeverArm.brep
Geometry engine set to: OCC Geometry Engine version 6.2.0
ITAPS GEOMETRY INTERFACE TEST PROGRAM:
gLoad:
Constructed 1 Volume: 1
Model contents:
vertices: 99
edges: 159
faces: 63
regions: 1
Success
tags: Tags defined on model: GLOBAL_ID, NAME
Success
gentity sets: Success
topology adjacencies: Success
construct: Created swept volume 4
Success
primitives: Success
transforms: Success
booleans: Updated volume(s): 11
Destroyed volume(s): 12
Updated volume(s): 13
Updated volume(s): 13
Destroyed volume(s): 14
Success
shutdown: Success
TSTT TEST SUMMARY:
Number Tests: 9
Number Successful: 9
Number Not Implemented: 0
Number Failed: 0
PASS: testgeom_occ
==================
All 1 tests passed
==================
make[4]: Leaving directory `/home/jason/cgm/test/64-occ/itaps'
make[3]: Leaving directory `/home/jason/cgm/test/64-occ/itaps'
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/itaps'
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/itaps'
Making check in test
make[1]: Entering directory `/home/jason/cgm/test/64-occ/test'
make sheet modify makept r_w test_occ operation
make[2]: Entering directory `/home/jason/cgm/test/64-occ/test'
make[2]: `sheet' is up to date.
make[2]: `modify' is up to date.
make[2]: `makept' is up to date.
make[2]: `r_w' is up to date.
make[2]: `test_occ' is up to date.
make[2]: `operation' is up to date.
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/test'
make check-TESTS
make[2]: Entering directory `/home/jason/cgm/test/64-occ/test'
PASS: sheet
ERROR: Fillet on vertex can only be done on sheet body.
Updated volume(s): 1
Updated volume(s): 2
ERROR: Cannot supply multiple radii when chamfering multiple vertices.
Updated volume(s): 2
Updated volume(s): 2
Exported: 3 OCC Bodies to fillet.occ
Modified volume
Created volume(s): 12
Destroyed volume(s): 5 to 10
Exported: 1 OCC Body to stitch.occ
=======================================
Constructed 1 Volume: 13
=======================================
Updated volume(s): 22
Destroyed volume(s): 23
Created volume(s): 25, 26
Destroyed volume(s): 22, 24
Total 0 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 7 faces.
Total 1 cuts performed, with from_shape having 8 faces.
Updated volume(s): 29
Total 0 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Updated volume(s): 30
Updated volume(s): 30
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 7 faces.
Total 1 cuts performed, with from_shape having 8 faces.
Updated volume(s): 30
Total 2 cuts performed, with from_shape having 8 faces.
Updated volume(s): 27
Destroyed volume(s): 28
Modified volume
Total 1 cuts performed, with from_shape having 7 faces.
Total 0 cuts performed, with from_shape having 2 faces.
Updated volume(s): 35
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
WARNING: Cant make a scar on existing face without splitting it.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
WARNING: Cant make a scar on existing face without splitting it.
Total 0 cuts performed, with from_shape having 6 faces.
Updated volume(s): 36
Created volume(s): 37
WARNING: Surfaces or Shells can't be used to cut a body.
ERROR: Subtract FAILED
Total 4 cuts performed, with from_shape having 10 faces.
Total 3 cuts performed, with from_shape having 9 faces.
Updated volume(s): 38, 39
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
No projection on the surface.
Total 1 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 0 cuts performed, with from_shape having 6 faces.
Total 1 cuts performed, with from_shape having 7 faces.
Total 1 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Removing projected curves
Created volume(s): 42
Updated volume(s): 44
Destroyed volume(s): 43
Updated volume(s): 44
Destroyed volume(s): 45
Destroyed volume(s): 44, 46
Created volume(s): 49
Destroyed volume(s): 47
Updated volume(s): 48
Created volume(s): 52
Destroyed volume(s): 51
Updated volume(s): 50
Updated volume(s): 54
Destroyed volume(s): 53
Updated volume(s): 56
Destroyed volume(s): 55
Updated volume(s): 57
Destroyed volume(s): 58
Updated volume(s): 57
Modified volume
Created swept volume 63
Modified volume
Created swept volume 64
Created swept volume 65
Modified volume
Created swept volume 66
ERROR: Only surfaces with no intersection point with the axis can be revolve-swept.
Created swept volume 67
ERROR: Only curves with no intersection point with the axis can be revolve-swept.
Created swept volume 68
Created swept volume 69
ERROR: Only curves with no intersection point with the axis can be revolve-swept.
Created swept volume 70
Created swept volume 71
ERROR: Sweep along curve itself is not allowed.
Created swept volume 72
Created swept volume 73
Modified volume
Created swept volume 74
Created swept volume 75
ERROR: Errors found during Mergechk session.
FAIL: modify
Exported: 4 OCC Bodies to prism.occ
Exported: 6 OCC Bodies to pyramid.occ
=======================================
Constructed 1 Volume: 12
=======================================
=======================================
Constructed 1 Volume: 13
=======================================
=======================================
Constructed 2 Volumes: 14, 15
=======================================
Created volume(s): 16 to 20
Exported: 6 OCC Bodies to point.occ
3 OCC Points to point.occ
Exported: 2 OCC Bodies to point.occ
3 OCC Points to point.occ
PASS: makept
=======================================
Total number of loaded entities : 109.
Constructed 18 Free Curves: 1 to 18
=======================================
Exported: 18 OCC Curves to ex3.occ
Exported: 18 OCC Curves to ex3export.iges
*******************************************************************
****** Statistics on Transfer (Write) ******
*******************************************************************
****** Transfer Mode = 0 I.E. As Is ******
****** Transferring Shape, ShapeType = 0 ******
** WorkSession : Sending all data
Step File Name : ex3export.step(578 ents) Write Done
Exported: 18 OCC Curves to ex3export.step
=======================================
Total number of loaded entities : 58.
Constructed 7 Volumes: 1 to 7
=======================================
Exported: 7 OCC Bodies to diffuser.occ
=======================================
... Step File Reading : ../../trunk/test/proe.stp
... STEP File Read ...
Elapsed time: 0 Hours 0 Minutes 0.001526 Seconds
CPU user time: 0 seconds
CPU system time: 0 seconds
... Step File loaded ...
Elapsed time: 0 Hours 0 Minutes 0.002605 Seconds
CPU user time: 0 seconds
CPU system time: 0 seconds
1393 records (entities,sub-lists,scopes), 3595 parameters
... Parameters prepared ... Elapsed time: 0 Hours 0 Minutes 0.00394 Seconds
CPU user time: 0 seconds
CPU system time: 0 seconds
... Objets analysed ...
Elapsed time: 0 Hours 0 Minutes 0.006272 Seconds
CPU user time: 0.01 seconds
CPU system time: 0 seconds
STEP Loading done : 815 Entities
Constructed 12 Volumes: 8 to 19
=======================================
Exported: 12 OCC Bodies to proe.occ
Exported: 12 OCC Bodies to proeexport.iges
*******************************************************************
****** Statistics on Transfer (Write) ******
*******************************************************************
****** Transfer Mode = 0 I.E. As Is ******
****** Transferring Shape, ShapeType = 0 ******
** WorkSession : Sending all data
Step File Name : proeexport.step(1348 ents) Write Done
Exported: 12 OCC Bodies to proeexport.step
=======================================
Constructed 2 Volumes: 20, 21
=======================================
Exported: 2 OCC Bodies to beforesub.occ
=======================================
Constructed 2 Volumes: 22, 23
=======================================
Exported: 2 OCC Bodies to beforesub2.occ
Created volume(s): 24, 25
Destroyed volume(s): 22, 23
Exported: 2 OCC Bodies to aftersub.occ
=======================================
Constructed 2 Volumes: 26, 27
=======================================
Updated volume(s): 26
Destroyed volume(s): 27
Exported: 1 OCC Body to unite2.occ
=======================================
Constructed 2 Volumes: 28, 29
=======================================
Updated volume(s): 29
Destroyed volume(s): 28
Exported: 1 OCC Body to unite3.occ
=======================================
Constructed 2 Volumes: 30, 31
=======================================
Updated volume(s): 30
Destroyed volume(s): 31
Exported: 1 OCC Body to unite5.occ
=======================================
Constructed 2 Volumes: 32, 33
=======================================
Updated volume(s): 33
Destroyed volume(s): 32
Exported: 1 OCC Body to unite6.occ
PASS: r_w
Constructed 1 Volume: 1
done...
PASS: test_occ
=======================================
Constructed 2 Volumes: 1, 2
=======================================
Total 0 cuts performed, with from_shape having 8 faces.
Total 0 cuts performed, with from_shape having 8 faces.
Created volume(s): 7
Updated volume(s): 1
PASS: operation
===================
1 of 6 tests failed
===================
make[2]: *** [check-TESTS] Error 1
make[2]: Leaving directory `/home/jason/cgm/test/64-occ/test'
make[1]: *** [check-am] Error 2
make[1]: Leaving directory `/home/jason/cgm/test/64-occ/test'
make: *** [check-recursive] Error 1
More information about the cgma-dev
mailing list