[AG-TECH] Microphone recommendations
Vine, Derek A
Derek.Vine at usd.edu
Thu Feb 1 17:15:20 CST 2007
I have had some experience with ceiling microphones in various Polycom
conference rooms, and have not really liked the results. When all is
working as desired, the quality and clarity is very nice, a few mics can
cover a 25 person room. The biggest thing that you have to watch out
for is the HVAC system in the room. With the units I have used,
whenever there is a conference in the room, the air exchangers need to
be turned off so that it does not sound as though there is a tornado in
the room. Then, all of the participants complain that they are getting
hot and the whole thing starts over again. As for what to do about your
issue with not wanting cords all over the room, I wish you luck.
Derek Vine
Communication Network Specialist
The University of South Dakota
414 East Clark Street
Vermillion, SD 57069
Office - (605) 677-5042
Cell - (605) 677-8215
ceddn at usd.edu
From: owner-ag-tech at mcs.anl.gov [mailto:owner-ag-tech at mcs.anl.gov] On
Behalf Of John I Quebedeaux Jr
Sent: Thursday, February 01, 2007 4:18 PM
To: Jeremy Mann
Cc: ag-tech
Subject: Re: [AG-TECH] Microphone recommendations
Jeremy,
My 2 cents from experience is that wireless mics are an extreme pain to
maintain due to battery consumption and also to control the appropriate
use and placement and audio... balance? If at all possible, wire them
for lower maint. particularly if they receive a lot of use. Wireless is
much more expensive as well, but they are convenient (it would seem)
until you begin dealing with batteries. Also, if they're wireless and
the mics are not in a fixed point then you have audio issues to deal
with with microphone placement- including the famous picking up a
wireless mic and holding it like a "StarTrek" communicator... <shudder>.
Perhaps it's just me, but i like it if my users can NOT physically move
the microphones that I've so carefully balanced for the acoustics in the
room they are in.
I feel your pain on the wires though and in particular the microphone
situation. Newer rooms here they don't want to have "fixed" mics on the
tables and the tables themselves aren't fixed either (i.e. can change
room config in a few minutes). I know that Jason Bell had demonstrated
at SC Global his success at incorporating ceiling microphones into his
room infrastructure. Perhaps some audio folks can comment on microphone
placement and installation a bit for new installations.
-John Q.
--
John I. Quebedeaux, Jr.; Louisiana State University
Computer Manager LBRN; 131 Life Sciences Bldg.
e-mail: johnq at lsu.edu; web: http://lbrn.lsu.edu
phone: 225-578-0062 / fax: 225-578-2597
On Feb 1, 2007, at 8:59 AM, Jeremy Mann wrote:
I've been assigned to design and install AG systems in several
existing conference rooms for different departments here on campus.
One design they all agree on, is the lack of or sparse use of cables.
The one portable AG node I built several years ago is not pleasing to
the eye at all because of all the cables.
I'm interested to hear if anyone else has built or is using wireless
table top microphones, or a combination of wireless microphones with
built-in echo cancellation.
Any brand recommendations?
--
Jeremy Mann
jeremy at biochem.uthscsa.edu
University of Texas Health Science Center
Bioinformatics Core Facility
http://www.bioinformatics.uthscsa.edu
Phone: (210) 567-2672
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/ag-tech/attachments/20070201/86a8a4f1/attachment.htm>
More information about the ag-tech
mailing list