[AG-TECH] noise reduction
mimiller at ncsa.uiuc.edu
Thu Jun 8 13:24:01 CDT 2006
If you're using an XAP unit you can also use the gate settings to turn
off the mics when no one is talking. The XAP will monitor the room and
only open the gate when someone speaks over the noise.
Take a look here:
Let me know if you have any questions.
Robert Putnam wrote:
> Although I don't have specific mic recommendations to make, one suggestion
> is to make sure that mics are as close as possible to the users. That
> might mean mic'ing each person individually rather than trying to use a
> room mic for everyone.
> X-Envelope-From: putnam at scv.bu.edu
> Date: Thu, 08 Jun 2006 09:36:22 -0600
> From: Lisa Metz <lmetz at engr.colostate.edu>
> Organization: Colorado State University
> X-Accept-Language: en-us, en
> X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at mailgw.mcs.anl.gov
> X-Spam-Status: No, hits=-0.5 required=5.0
> X-Spam-Checker-Version: SpamAssassin 2.55 (184.108.40.206-2003-05-19-exp)
> X-MCS-Mail-Loop: ag-tech
> Sender: owner-ag-tech at mcs.anl.gov
> X-Score-Level: 0
> X-UID: 30782
> Good morning,
> I am a project lead for an AG node at CSU. The room we are considering
> using is quite noisy and we're trying to find the best possible solution
> for this issue.
> Short of re-locating the room (or the two large air-conditioning units) I'm
> looking for microphones that might help with noise reduction. Has anyone
> else dealt with noise reduction successfully by using a specific brand or
> type of microphone? Or used any other tricks of the trade?
> Thanks in advance for any help!
> Lisa Metz
> Lisa Metz
> Computer Support Analyst
> Engineering Network Services
> Phone: 491-3465
> Email: lmetz at engr.colostate.edu
> "You must be the change you want to see in the world"
> -Mahatma Gandhi
Video Technology Services
Persistent Infrastructure Directorate
National Center for Supercomputing Applications
University of Illinois - UC
"If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec
More information about the ag-tech