[AG-TECH] Venue client causing network errors on CISCO 4506

[Michael Gates]

I'm wondering if any of the network folks have seen a Venue Client cause
errors on a CISCO 4506 Switch with a Supervisor II+ card.

Basically, the switch is seeing errors from the host running the
software, like this:

 5 minute input rate 179000 bits/sec, 54 packets/sec
  5 minute output rate 1377000 bits/sec, 333 packets/sec
     140735 packets input, 50489999 bytes, 0 no buffer
     Received 140639 broadcasts (140598 multicast)
     795 runts, 0 giants, 0 throttles
     2223 input errors, 1428 CRC, 0 frame, 0 overrun, 0 ignored

The errors continue to increase with each, what appear to be, bursts of
packets. If the software is stopped, the errors stop too.

Anybody?

Thanks in advance for the help

--
======================
Michael Gates
VTC Services
mgates at sdsc dot edu
858.534.5188
SDSC Main bld. Room 109
======================