[Nek5000-users] logfile
nek5000-users at lists.mcs.anl.gov
nek5000-users at lists.mcs.anl.gov
Fri Mar 30 06:21:39 CDT 2018
Thanks for the information.
In my calculation, I am using a variable viscosity formulation. The
viscosity depends on the temperature. As the run proceeds the initial
residual for the TEMP gradually rises from 1E+03 until at around at
the value 6E+07, the logfile shows an error for non-positive
diffusivity. I have checked the temperature distribution which has no
such value so as to make the diffusivity negative (or zero). Please
indicate what I may be doing wrong.
Thank you
Swarandeep
On Fri, Mar 30, 2018 at 3:30 PM, <nek5000-users at lists.mcs.anl.gov> wrote:
>
>>Step 1520, t= 7.6000000E-02, DT= 5.0000000E-05, C= 0.072 5.3831E+03 3.5403E+00
> timestep, time, dt, Courant Number, elapsed solver time, solver time of last time iteration
>
>>1520 Hmholtz TEMP 12 3.8789E-11 4.5120E+07 1.0000E-10
> timestep, solve type, iteration counter, final residual, initial residual, solver tolerance
>
> ...
>
>
> -----Original message-----
>> From:nek5000-users at lists.mcs.anl.gov <nek5000-users at lists.mcs.anl.gov>
>> Sent: Friday 30th March 2018 11:52
>> To: nek5000-users at lists.mcs.anl.gov
>> Subject: Re: [Nek5000-users] logfile
>>
>> The following is my logfile entry (sample lines). The first line is
>> understandable. What do the values in the third and following lines
>> denote?
>>
>>
>> ------------------------------------------------------
>> Step 1520, t= 7.6000000E-02, DT= 5.0000000E-05, C= 0.072 5.3831E+03
>> 3.5403E+00
>> Solving for Hmholtz scalars
>> 1520 Hmholtz TEMP 12 3.8789E-11 4.5120E+07 1.0000E-10
>> 1520 Scalars done 7.6000E-02 8.3823E-02
>> Solving for fluid
>> 1520 Helmh3 fluid 17 3.6594E-11 4.7524E-01 1.0000E-10
>> 1520 U-PRES gmres 120 1.3494E-08 4.5675E-06
>> 1.0000E-10 7.8799E-01 3.0171E+00
>> 1520 Fluid done 7.6000E-02 3.3650E+00
>> --------------------------------------------------------
>>
>> On Fri, Mar 30, 2018 at 3:05 PM, <nek5000-users at lists.mcs.anl.gov> wrote:
>> > I am not sure what you are talking about?
>> >
>> > -----Original message-----
>> >> From:nek5000-users at lists.mcs.anl.gov <nek5000-users at lists.mcs.anl.gov>
>> >> Sent: Friday 30th March 2018 10:30
>> >> To: nek5000-users at lists.mcs.anl.gov
>> >> Subject: [Nek5000-users] logfile
>> >>
>> >> Hi Neks,
>> >>
>> >> What are the entries in the logfile that is output from running
>> >> the code. Please let me know where the entries are determined in the
>> >> code.
>> >>
>> >> Thanks
>> >> Swarandeep
>> >> _______________________________________________
>> >> Nek5000-users mailing list
>> >> Nek5000-users at lists.mcs.anl.gov
>> >> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> >>
>> > _______________________________________________
>> > Nek5000-users mailing list
>> > Nek5000-users at lists.mcs.anl.gov
>> > https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>> _______________________________________________
>> Nek5000-users mailing list
>> Nek5000-users at lists.mcs.anl.gov
>> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
>>
> _______________________________________________
> Nek5000-users mailing list
> Nek5000-users at lists.mcs.anl.gov
> https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
More information about the Nek5000-users
mailing list