<div dir="ltr">Dear All,<div>I'm using PETSc in conjunction wit PetIGA to solve a 3D phase-field problem on HPC cluster.</div><div>Given the computational load of the code, I'm running it on 15 nodes with a multithreaded job. Now there is a wall time for the current partition set to 24 hours, afterward, the job will be killed.</div><div><br></div><div>I have been searching for the possibility of using the Trajectory to resume the run after it being terminated by reloading the dumped binary files from TSSetSaveTrajectory once again into the TS, i.e., state vector and it's time derivative, timestep and time.</div><div><br></div><div>I have tried using TSTrajectoryGet but I ended up with the following error:</div><div>[0]PETSC ERROR: Object is in wrong state<br>[0]PETSC ERROR: TS solver did not save trajectory<br></div><div><br></div><div>So, I would like to ask if in theory that would be possible? if so, how can I reload the trajectory from a previously terminated job into a new one?</div><div><br></div><div>Yours Sincerely.</div><div><div><br></div>-- <br><div dir="ltr" data-smartmail="gmail_signature"><div dir="ltr"><b>Mohammed Ashour, M.Sc.<br></b>PhD Scholar<br>Bauhaus-Universität Weimar<br>Institute of Structural Mechanics (ISM)<br>Marienstraße 7<br>99423 Weimar, Germany<br>Mobile: +(49) 176 58834667</div></div></div></div>