0 SNES Function norm 1.034922128099e+00 0 KSP Residual norm 1.320331268266e+02 1 KSP Residual norm 1.646356667470e+00 2 KSP Residual norm 1.888508472398e-02 3 KSP Residual norm 2.634262553737e-04 4 KSP Residual norm 1.971275341119e-06 5 KSP Residual norm 1.822309249520e-08 1 SNES Function norm 6.469929933305e-05 0 KSP Residual norm 1.037837826706e+01 1 KSP Residual norm 7.168009788457e-03 2 KSP Residual norm 7.328138828897e-05 3 KSP Residual norm 4.425515981008e-07 4 KSP Residual norm 2.699916867303e-09 2 SNES Function norm 4.967666972683e-07 0 KSP Residual norm 8.502321903584e-02 1 KSP Residual norm 5.011740850611e-05 2 KSP Residual norm 2.761514207018e-07 3 KSP Residual norm 2.592865259479e-10 4 KSP Residual norm 1.715762619776e-12 3 SNES Function norm 3.366076401527e-11 SNES Object: 1 MPI processes type: newtonls maximum iterations=50, maximum function evaluations=10000 tolerances: relative=1e-08, absolute=1e-50, solution=1e-08 total number of linear solver iterations=13 total number of function evaluations=4 norm schedule ALWAYS SNESLineSearch Object: 1 MPI processes type: bt interpolation: cubic alpha=1.000000e-04 maxstep=1.000000e+08, minlambda=1.000000e-12 tolerances: relative=1.000000e-08, absolute=1.000000e-15, lambda=1.000000e-08 maximum iterations=40 KSP Object: 1 MPI processes type: gmres GMRES: restart=30, using Classical (unmodified) Gram-Schmidt Orthogonalization with no iterative refinement GMRES: happy breakdown tolerance 1e-30 maximum iterations=10000, initial guess is zero tolerances: relative=1e-09, absolute=1e-50, divergence=10000 left preconditioning using PRECONDITIONED norm type for convergence test PC Object: 1 MPI processes type: mg MG: type is MULTIPLICATIVE, levels=7 cycles=v Cycles per PCApply=1 Not using Galerkin computed coarse grid matrices Coarse grid solver -- level ------------------------------- KSP Object: (mg_coarse_) 1 MPI processes type: preonly maximum iterations=1, initial guess is zero tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using NONE norm type for convergence test PC Object: (mg_coarse_) 1 MPI processes type: lu LU: out-of-place factorization tolerance for zero pivot 2.22045e-14 using diagonal shift on blocks to prevent zero pivot [INBLOCKS] matrix ordering: nd factor fill ratio given 5, needed 4.34182 Factored matrix follows: Mat Object: 1 MPI processes type: seqaij rows=441, cols=441 package used to perform factorization: petsc total: nonzeros=9209, allocated nonzeros=9209 total number of mallocs used during MatSetValues calls =0 not using I-node routines linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=441, cols=441 total: nonzeros=2121, allocated nonzeros=2121 total number of mallocs used during MatSetValues calls =0 not using I-node routines Down solver (pre-smoother) on level 1 ------------------------------- KSP Object: (mg_levels_1_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_1_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=1681, cols=1681 total: nonzeros=8241, allocated nonzeros=8241 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) Down solver (pre-smoother) on level 2 ------------------------------- KSP Object: (mg_levels_2_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_2_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=6561, cols=6561 total: nonzeros=32481, allocated nonzeros=32481 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) Down solver (pre-smoother) on level 3 ------------------------------- KSP Object: (mg_levels_3_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_3_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=25921, cols=25921 total: nonzeros=128961, allocated nonzeros=128961 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) Down solver (pre-smoother) on level 4 ------------------------------- KSP Object: (mg_levels_4_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_4_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=103041, cols=103041 total: nonzeros=513921, allocated nonzeros=513921 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) Down solver (pre-smoother) on level 5 ------------------------------- KSP Object: (mg_levels_5_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_5_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=410881, cols=410881 total: nonzeros=2.05184e+06, allocated nonzeros=2.05184e+06 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) Down solver (pre-smoother) on level 6 ------------------------------- KSP Object: (mg_levels_6_) 1 MPI processes type: richardson Richardson: damping factor=1 maximum iterations=2 tolerances: relative=1e-05, absolute=1e-50, divergence=10000 left preconditioning using nonzero initial guess using NONE norm type for convergence test PC Object: (mg_levels_6_) 1 MPI processes type: sor SOR: type = local_symmetric, iterations = 1, local iterations = 1, omega = 1 linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=1640961, cols=1640961 total: nonzeros=8.19968e+06, allocated nonzeros=8.19968e+06 total number of mallocs used during MatSetValues calls =0 not using I-node routines Up solver (post-smoother) same as down solver (pre-smoother) linear system matrix = precond matrix: Mat Object: 1 MPI processes type: seqaij rows=1640961, cols=1640961 total: nonzeros=8.19968e+06, allocated nonzeros=8.19968e+06 total number of mallocs used during MatSetValues calls =0 not using I-node routines ************************************************************************************************************************ *** WIDEN YOUR WINDOW TO 120 CHARACTERS. Use 'enscript -r -fCourier9' to print this document *** ************************************************************************************************************************ ---------------------------------------------- PETSc Performance Summary: ---------------------------------------------- ./ex5 on a arch-linux2-c-opt named helios91 with 1 processor, by tnicolas Thu Oct 15 12:48:33 2015 Using Petsc Release Version 3.6.0, Jun, 09, 2015 Max Max/Min Avg Total Time (sec): 7.639e+00 1.00000 7.639e+00 Objects: 3.280e+02 1.00000 3.280e+02 Flops: 3.364e+09 1.00000 3.364e+09 3.364e+09 Flops/sec: 4.405e+08 1.00000 4.405e+08 4.405e+08 MPI Messages: 0.000e+00 0.00000 0.000e+00 0.000e+00 MPI Message Lengths: 0.000e+00 0.00000 0.000e+00 0.000e+00 MPI Reductions: 0.000e+00 0.00000 Flop counting convention: 1 flop = 1 real number operation of type (multiply/divide/add/subtract) e.g., VecAXPY() for real vectors of length N --> 2N flops and VecAXPY() for complex vectors of length N --> 8N flops Summary of Stages: ----- Time ------ ----- Flops ----- --- Messages --- -- Message Lengths -- -- Reductions -- Avg %Total Avg %Total counts %Total Avg %Total counts %Total 0: Main Stage: 7.6386e+00 100.0% 3.3645e+09 100.0% 0.000e+00 0.0% 0.000e+00 0.0% 0.000e+00 0.0% ------------------------------------------------------------------------------------------------------------------------ See the 'Profiling' chapter of the users' manual for details on interpreting output. Phase summary info: Count: number of times phase was executed Time and Flops: Max - maximum over all processors Ratio - ratio of maximum to minimum over all processors Mess: number of messages sent Avg. len: average message length (bytes) Reduct: number of global reductions Global: entire computation Stage: stages of a computation. Set stages with PetscLogStagePush() and PetscLogStagePop(). %T - percent time in this phase %F - percent flops in this phase %M - percent messages in this phase %L - percent message lengths in this phase %R - percent reductions in this phase Total Mflop/s: 10e-6 * (sum of flops over all processors)/(max time over all processors) ------------------------------------------------------------------------------------------------------------------------ Event Count Time (sec) Flops --- Global --- --- Stage --- Total Max Ratio Max Ratio Max Ratio Mess Avg len Reduct %T %F %M %L %R %T %F %M %L %R Mflop/s ------------------------------------------------------------------------------------------------------------------------ --- Event Stage 0: Main Stage SNESSolve 1 1.0 6.9078e+00 1.0 3.36e+09 1.0 0.0e+00 0.0e+00 0.0e+00 90100 0 0 0 90100 0 0 0 487 SNESFunctionEval 4 1.0 1.4139e-01 1.0 7.22e+07 1.0 0.0e+00 0.0e+00 0.0e+00 2 2 0 0 0 2 2 0 0 0 511 SNESJacobianEval 21 1.0 1.1781e+00 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 15 0 0 0 0 15 0 0 0 0 0 SNESLineSearch 3 1.0 1.9966e-01 1.0 1.53e+08 1.0 0.0e+00 0.0e+00 0.0e+00 3 5 0 0 0 3 5 0 0 0 764 VecDot 3 1.0 6.1059e-03 1.0 9.85e+06 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 1612 VecMDot 13 1.0 4.6819e-02 1.0 1.15e+08 1.0 0.0e+00 0.0e+00 0.0e+00 1 3 0 0 0 1 3 0 0 0 2453 VecNorm 23 1.0 3.1634e-02 1.0 7.55e+07 1.0 0.0e+00 0.0e+00 0.0e+00 0 2 0 0 0 0 2 0 0 0 2386 VecScale 16 1.0 1.4112e-02 1.0 2.63e+07 1.0 0.0e+00 0.0e+00 0.0e+00 0 1 0 0 0 0 1 0 0 0 1861 VecCopy 9 1.0 2.4169e-02 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 VecSet 369 1.0 2.8663e-01 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 4 0 0 0 0 4 0 0 0 0 0 VecAXPY 3 1.0 7.1528e-03 1.0 9.85e+06 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 1376 VecAYPX 96 1.0 4.8555e-02 1.0 3.50e+07 1.0 0.0e+00 0.0e+00 0.0e+00 1 1 0 0 0 1 1 0 0 0 721 VecWAXPY 3 1.0 9.7899e-03 1.0 4.92e+06 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 503 VecMAXPY 16 1.0 7.0828e-02 1.0 1.58e+08 1.0 0.0e+00 0.0e+00 0.0e+00 1 5 0 0 0 1 5 0 0 0 2224 VecPointwiseMult 18 1.0 2.1641e-03 1.0 1.65e+06 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 760 VecScatterBegin 31 1.0 2.1942e-02 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 VecReduceArith 6 1.0 6.9492e-03 1.0 1.97e+07 1.0 0.0e+00 0.0e+00 0.0e+00 0 1 0 0 0 0 1 0 0 0 2834 VecReduceComm 3 1.0 6.1989e-06 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 VecNormalize 16 1.0 3.2010e-02 1.0 7.88e+07 1.0 0.0e+00 0.0e+00 0.0e+00 0 2 0 0 0 0 2 0 0 0 2461 MatMult 112 1.0 6.3461e-01 1.0 5.51e+08 1.0 0.0e+00 0.0e+00 0.0e+00 8 16 0 0 0 8 16 0 0 0 868 MatMultAdd 96 1.0 2.4549e-01 1.0 1.57e+08 1.0 0.0e+00 0.0e+00 0.0e+00 3 5 0 0 0 3 5 0 0 0 642 MatMultTranspose 120 1.0 2.7388e-01 1.0 1.97e+08 1.0 0.0e+00 0.0e+00 0.0e+00 4 6 0 0 0 4 6 0 0 0 719 MatSolve 16 1.0 4.0054e-04 1.0 2.88e+05 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 718 MatSOR 192 1.0 3.4541e+00 1.0 1.93e+09 1.0 0.0e+00 0.0e+00 0.0e+00 45 57 0 0 0 45 57 0 0 0 559 MatLUFactorSym 1 1.0 2.7990e-04 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 MatLUFactorNum 3 1.0 4.8876e-04 1.0 3.43e+05 1.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 702 MatResidual 96 1.0 4.0677e-01 1.0 3.50e+08 1.0 0.0e+00 0.0e+00 0.0e+00 5 10 0 0 0 5 10 0 0 0 860 MatAssemblyBegin 34 1.0 5.0068e-06 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 MatAssemblyEnd 34 1.0 1.6640e-01 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 2 0 0 0 0 2 0 0 0 0 0 MatGetRowIJ 1 1.0 2.0981e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 MatGetOrdering 1 1.0 1.6618e-04 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 MatView 9 1.0 5.2023e-04 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 0 0 0 0 0 0 0 0 0 0 0 KSPGMRESOrthog 13 1.0 1.0013e-01 1.0 2.30e+08 1.0 0.0e+00 0.0e+00 0.0e+00 1 7 0 0 0 1 7 0 0 0 2294 KSPSetUp 24 1.0 5.6911e-02 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00 1 0 0 0 0 1 0 0 0 0 0 KSPSolve 3 1.0 5.7643e+00 1.0 3.19e+09 1.0 0.0e+00 0.0e+00 0.0e+00 75 95 0 0 0 75 95 0 0 0 554 PCSetUp 3 1.0 9.0360e-01 1.0 4.14e+07 1.0 0.0e+00 0.0e+00 0.0e+00 12 1 0 0 0 12 1 0 0 0 46 PCApply 16 1.0 4.3645e+00 1.0 2.60e+09 1.0 0.0e+00 0.0e+00 0.0e+00 57 77 0 0 0 57 77 0 0 0 595 ------------------------------------------------------------------------------------------------------------------------ Memory usage is given in bytes: Object Type Creations Destructions Memory Descendants' Mem. Reports information only for process 0. --- Event Stage 0: Main Stage SNES 1 1 1332 0 SNESLineSearch 1 1 864 0 DMSNES 8 8 5792 0 Vector 137 137 477365776 0 Vector Scatter 20 20 13120 0 Matrix 20 20 313061452 0 Distributed Mesh 15 15 74016 0 Star Forest Bipartite Graph 30 30 25568 0 Discrete System 15 15 12720 0 Index Set 43 43 19746896 0 IS L to G Mapping 14 14 17524632 0 Krylov Solver 8 8 27192 0 DMKSP interface 7 7 4536 0 Preconditioner 8 8 7864 0 Viewer 1 0 0 0 ======================================================================================================================== Average time to get PetscTime(): 9.53674e-08 #PETSc Option Table entries: -da_grid_x 21 -da_grid_y 21 -da_refine 6 -ksp_monitor -ksp_rtol 1e-9 -log_summary -mg_levels_ksp_type richardson -pc_mg_levels 7 -pc_type mg -snes_monitor -snes_view #End of PETSc Option Table entries Compiled without FORTRAN kernels Compiled with full precision matrices (default) sizeof(short) 2 sizeof(int) 4 sizeof(long) 8 sizeof(void*) 8 sizeof(PetscScalar) 8 sizeof(PetscInt) 4 Configure options: --prefix=/csc/softs/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real --with-debugging=0 --with-x=0 --with-cc=mpicc --with-fc=mpif90 --with-cxx=mpicxx --with-fortran --known-mpi-shared-libraries=1 --with-scalar-type=real --with-precision=double --CFLAGS="-g -O3 -mavx -mkl" --CXXFLAGS="-g -O3 -mavx -mkl" --FFLAGS="-g -O3 -mavx -mkl" ----------------------------------------- Libraries compiled on Mon Sep 28 20:22:47 2015 on helios85 Machine characteristics: Linux-2.6.32-573.1.1.el6.Bull.80.x86_64-x86_64-with-redhat-6.4-Santiago Using PETSc directory: /csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0 Using PETSc arch: arch-linux2-c-opt ----------------------------------------- Using C compiler: mpicc -g -O3 -mavx -mkl -fPIC ${COPTFLAGS} ${CFLAGS} Using Fortran compiler: mpif90 -g -O3 -mavx -mkl -fPIC ${FOPTFLAGS} ${FFLAGS} ----------------------------------------- Using include paths: -I/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/arch-linux2-c-opt/include -I/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/include -I/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/include -I/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/arch-linux2-c-opt/include -I/opt/mpi/bullxmpi/1.2.8.2/include ----------------------------------------- Using C linker: mpicc Using Fortran linker: mpif90 Using libraries: -Wl,-rpath,/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/arch-linux2-c-opt/lib -L/csc/releases/buildlog/anl/petsc-3.6.0/intel-15.0.0.090/bullxmpi-1.2.8.2/real/petsc-3.6.0/arch-linux2-c-opt/lib -lpetsc -lhwloc -lxml2 -lssl -lcrypto -Wl,-rpath,/opt/mpi/bullxmpi/1.2.8.2/lib -L/opt/mpi/bullxmpi/1.2.8.2/lib -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -L/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -lmpi_f90 -lmpi_f77 -lm -lifport -lifcore -lm -lmpi_cxx -ldl -Wl,-rpath,/opt/mpi/bullxmpi/1.2.8.2/lib -L/opt/mpi/bullxmpi/1.2.8.2/lib -lmpi -lnuma -lrt -lnsl -lutil -Wl,-rpath,/opt/mpi/bullxmpi/1.2.8.2/lib -L/opt/mpi/bullxmpi/1.2.8.2/lib -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -L/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -lmkl_intel_lp64 -lmkl_intel_thread -lmkl_core -liomp5 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -limf -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -lsvml -lirng -lipgo -ldecimal -lcilkrts -lstdc++ -lgcc_s -lirc -lpthread -lirc_s -Wl,-rpath,/opt/mpi/bullxmpi/1.2.8.2/lib -L/opt/mpi/bullxmpi/1.2.8.2/lib -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -L/usr/lib/gcc/x86_64-redhat-linux/4.4.7 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/compiler/lib/intel64 -Wl,-rpath,/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -L/opt/intel/composer_xe_2015.0.090/mkl/lib/intel64 -ldl -----------------------------------------