OK so to conclude this thread, on Windows I need to run the command line window in Administrator mode, and start the daemon as :<br><br>/cygdrive/c/Program\ Files/MPICH2/bin/smpd.exe -install<br><br>then mpiexec works and 'make test' in petsc source behaves as expected (login/password needed).<br>
<br>Will now try to build a version with hypre and parmetis.<br><br>Many thanks for your support.<br><br>Regards,<br>Dominik<br><br><div class="gmail_quote">On Thu, Jul 22, 2010 at 11:12 PM, Satish Balay <span dir="ltr"><<a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">I see the follwing following with mpiexec/MPICH2 [default<br>
install/configuration]. If it doesn't work this way for you then check<br>
with MPICH2 developers - on the correct way to use the MPICH2 version<br>
you've installed.<br>
<br>
Satish<br>
--------------<br>
<br>
sbalay@ps3 ~/junk<br>
$ /cygdrive/c/Program\ Files/MPICH2/bin/mpiexec.exe -n 4 ./cpi.exe<br>
User credentials needed to launch processes:<br>
account (domain\user) [PS3\sbalay]:<br>
password:<br>
Process 2 on ps3<br>
Process 3 on ps3<br>
Process 1 on ps3<br>
pi is approximately 3.1416009869231249, Error is 0.0000083333333318<br>
wall clock time = 0.003559<br>
Process 0 on ps3<br>
<br>
sbalay@ps3 ~/junk<br>
$ /cygdrive/c/Program\ Files/MPICH2/bin/mpiexec.exe -localonly -n 4 ./cpi.exe<br>
Process 2 on ps3<br>
Process 3 on ps3<br>
Process 1 on ps3<br>
pi is approximately 3.1416009869231249, Error is 0.0000083333333318<br>
wall clock time = 0.003310<br>
Process 0 on ps3<br>
<br>
sbalay@ps3 ~/junk<br>
<div><div></div><div class="h5"><br>
<br>
On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
<br>
> With no luck....<br>
><br>
> $ /cygdrive/c/Program\ Files/MPICH2/bin/mpiexec.exe -localonly -np 4 ./ex2<br>
> Unknown option: -d<br>
> Error while connecting to host, No connection could be made because the<br>
> target machine actively refused it. (10061)<br>
> Connect on sock (host=Tharsis, port=8676) failed, exhaused all end points<br>
> Unable to connect to 'Tharsis:8676',<br>
> sock error: Error = -1<br>
><br>
> ReadFile() failed, error 109<br>
> unable to start the local smpd manager.<br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
> On Thu, Jul 22, 2010 at 10:52 PM, Satish Balay <<a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>> wrote:<br>
><br>
> > Have you tried 'mpiexec -localonly'?<br>
> ><br>
> > Satish<br>
> ><br>
> > On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
> ><br>
> > > I tried:<br>
> > ><br>
> > > $ /cygdrive/c/Program\ Files/MPICH2/bin/mpiexec.exe -np 4 ./ex2<br>
> > > Error while connecting to host, No connection could be made because the<br>
> > > target machine actively refused it. (10061)<br>
> > > Connect on sock (host=Tharsis, port=8676) failed, exhaused all end points<br>
> > > Unable to connect to 'Tharsis:8676',<br>
> > > sock error: Error = -1<br>
> > ><br>
> > > I have clicked YES in the Windows Firewall requester....<br>
> > ><br>
> > > Appreciating any hints...<br>
> > ><br>
> > ><br>
> > > On Thu, Jul 22, 2010 at 10:45 PM, Satish Balay <<a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>><br>
> > wrote:<br>
> > ><br>
> > > > On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
> > > ><br>
> > > > > Thanks a lot.<br>
> > > > > But now there is no meaningful output...<br>
> > > ><br>
> > > > What do you mean? Have you run the examples manually? You just show the<br>
> > > > 'compile' step - which looks successful.<br>
> > > ><br>
> > > > > > > > mpiexec -n 2 ./ex2.exe<br>
> > > > > > > > mpiexec -localonly -n 2 ./ex2.exe<br>
> > > ><br>
> > > > Satish<br>
> > > ><br>
> > > > ><br>
> > > > > Dominik@Tharsis<br>
> > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/src/ksp/ksp/examples/tutorials<br>
> > > > > $ make PETSC_DIR=/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3<br>
> > > > > PETSC_ARCH=win64-msvc-release ex2<br>
> > > > > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > cl -o<br>
> > > > > ex2.o -c -MT -wd4996<br>
> > > > > -I/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/src/dm/mesh/sieve<br>
> > > > > -I/cygdrive/c/Users/Dominik/Programs/<br>
> > > > > petsc-3.1-p3/win64-msvc-release/include<br>
> > > > > -I/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/include<br>
> > > > > -I/cygdrive/c/Program Files/MPICH2/include<br>
> > > > > -D__INSDIR__=src/ksp/ksp/examples/tutorials/ ex2.c<br>
> > > > > ex2.c<br>
> > > > > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > cl<br>
> > > > -MT<br>
> > > > > -wd4996 -o ex2 ex2.o<br>
> > > > ><br>
> > -L/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/win64-msvc-release/lib<br>
> > > > > -L/cygdrive/c/Users/Dominik/P<br>
> > > > > rograms/petsc-3.1-p3/win64-msvc-release/lib -lpetsc<br>
> > > > ><br>
> > -L/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/win64-msvc-release/lib<br>
> > > > > -lf2clapack -lf2cblas /cygdrive/c/Program\<br>
> > Files/MPICH2/lib/fmpich2.lib /<br>
> > > > > cygdrive/c/Program\ Files/MPICH2/lib/fmpich2g.lib<br>
> > /cygdrive/c/Program\<br>
> > > > > Files/MPICH2/lib/mpi.lib Gdi32.lib User32.lib Advapi32.lib<br>
> > Kernel32.lib<br>
> > > > > Ws2_32.lib<br>
> > > > > /usr/bin/rm -f ex2.o<br>
> > > > ><br>
> > > > ><br>
> > > > ><br>
> > > > ><br>
> > > > ><br>
> > > > ><br>
> > > > > On Thu, Jul 22, 2010 at 10:23 PM, Satish Balay <<a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>><br>
> > > > wrote:<br>
> > > > ><br>
> > > > > > Sorry - you need PETSC_ARCH and PETSC_DIR with make. [normally<br>
> > these<br>
> > > > are<br>
> > > > > > set as env variables]<br>
> > > > > ><br>
> > > > > > make PETSC_DIR=/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3<br>
> > > > > > PETSC_ARCH=win64-msvc-release ex2<br>
> > > > > ><br>
> > > > > > Satish<br>
> > > > > ><br>
> > > > > > On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
> > > > > ><br>
> > > > > > > Hmmm I get the following errors:<br>
> > > > > > ><br>
> > > > > > > $ cd src/ksp/ksp/examples/tutorials<br>
> > > > > > ><br>
> > > > > > > Dominik@Tharsis<br>
> > > > > ><br>
> > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/src/ksp/ksp/examples/tutorials<br>
> > > > > > > $ make ex2<br>
> > > > > > > makefile:16: /conf/variables: No such file or directory<br>
> > > > > > > makefile:17: /conf/rules: No such file or directory<br>
> > > > > > > makefile:856: /conf/test: No such file or directory<br>
> > > > > > > make: *** No rule to make target `/conf/test'. Stop.<br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > ><br>
> > > > > > > On Thu, Jul 22, 2010 at 10:11 PM, Satish Balay <<br>
> > <a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>><br>
> > > > > > wrote:<br>
> > > > > > ><br>
> > > > > > > > Should have said:<br>
> > > > > > > ><br>
> > > > > > > > cd src/ksp/ksp/examples/tutorials<br>
> > > > > > > > make ex2<br>
> > > > > > > > mpiexec -n 2 ./ex2.exe<br>
> > > > > > > > mpiexec -localonly -n 2 ./ex2.exe<br>
> > > > > > > ><br>
> > > > > > > > Satish<br>
> > > > > > > ><br>
> > > > > > > > On Thu, 22 Jul 2010, Satish Balay wrote:<br>
> > > > > > > ><br>
> > > > > > > > > Try running manually. MPICH2 install by default insists on<br>
> > passwd<br>
> > > > -<br>
> > > > > > > > > and this process isn't handled by petsc scripts properly.<br>
> > > > > > > > ><br>
> > > > > > > > > [or use '--with-mpiexec=mpiexec --localonly']<br>
> > > > > > > > ><br>
> > > > > > > > > Satish<br>
> > > > > > > > ><br>
> > > > > > > > > On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
> > > > > > > > ><br>
> > > > > > > > > > Dear all,<br>
> > > > > > > > > ><br>
> > > > > > > > > > The problem was apparently that I was trying to configure<br>
> > Petsc<br>
> > > > > > under<br>
> > > > > > > > the 32<br>
> > > > > > > > > > bit terminal with the 64 bit MPI system installation.<br>
> > > > > > > > > ><br>
> > > > > > > > > > I managed to invoke the 64 bit terminal and configure and<br>
> > build<br>
> > > > > > Petsc<br>
> > > > > > > > as<br>
> > > > > > > > > > follows:<br>
> > > > > > > > > ><br>
> > > > > > > > > > ./config/configure.py PETSC_DIR=$PWD<br>
> > > > PETSC_ARCH=win64-msvc-release<br>
> > > > > > > > > > --download-c-blas-lapack=1 --with-x=0 --with-debugging=0<br>
> > > > > > > > --with-cc='win32fe<br>
> > > > > > > > > > cl' --with-fc=0<br>
> > > > > > > > > ><br>
> > > > > > > > > > (with the official MPICH2 64bitinstallation):<br>
> > > > > > > > > ><br>
> > > > > > > > > > MPI:<br>
> > > > > > > > > > Includes: -I/cygdrive/c/Program\ Files/MPICH2/include<br>
> > > > > > > > > > Library: /cygdrive/c/Program\<br>
> > Files/MPICH2/lib/fmpich2.lib<br>
> > > > > > > > > > /cygdrive/c/Program\ Files/MPICH2/lib/fmpich2g.lib<br>
> > > > > > /cygdrive/c/Program\<br>
> > > > > > > > > > Files/MPICH2/lib/mpi.lib<br>
> > > > > > > > > ><br>
> > > > > > > > > > However, I am getting errors when executing "make test":<br>
> > > > (errors<br>
> > > > > > below)<br>
> > > > > > > > > > Any ideas how to proceed? (I clicked some 'yes when Windows<br>
> > > > popped<br>
> > > > > > up a<br>
> > > > > > > > > > yes/no security window)<br>
> > > > > > > > > ><br>
> > > > > > > > > > Regards,<br>
> > > > > > > > > > Dominik<br>
> > > > > > > > > ><br>
> > > > > > > > > ><br>
> > > > > > > > > > $ make<br>
> > > > PETSC_DIR=/cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3<br>
> > > > > > > > > > PETSC_ARCH=win64-msvc-release test<br>
> > > > > > > > > > Running test examples to verify correct installation<br>
> > > > > > > > > > Possible error running C/C++<br>
> > src/snes/examples/tutorials/ex19<br>
> > > > with<br>
> > > > > > 1<br>
> > > > > > > > MPI<br>
> > > > > > > > > > process<br>
> > > > > > > > > > See<br>
> > > > > > > ><br>
> > > > > ><br>
> > > ><br>
> > <a href="http://www.mcs.anl.gov/petsc/petsc-as/documentation/troubleshooting.html" target="_blank">http://www.mcs.anl.gov/petsc/petsc-as/documentation/troubleshooting.html</a><br>
> > > > > > > > > > Error while connecting to host, No connection could be made<br>
> > > > because<br>
> > > > > > the<br>
> > > > > > > > > > target machine actively refused it. (10061)<br>
> > > > > > > > > > Connect on sock (host=Tharsis, port=8676) failed, exhaused<br>
> > all<br>
> > > > end<br>
> > > > > > > > points<br>
> > > > > > > > > > Unable to connect to 'Tharsis:8676',<br>
> > > > > > > > > > sock error: Error = -1<br>
> > > > > > > > > ><br>
> > > > > > > > > > Possible error running C/C++<br>
> > src/snes/examples/tutorials/ex19<br>
> > > > with<br>
> > > > > > 2<br>
> > > > > > > > MPI<br>
> > > > > > > > > > processes<br>
> > > > > > > > > > See<br>
> > > > > > > ><br>
> > > > > ><br>
> > > ><br>
> > <a href="http://www.mcs.anl.gov/petsc/petsc-as/documentation/troubleshooting.html" target="_blank">http://www.mcs.anl.gov/petsc/petsc-as/documentation/troubleshooting.html</a><br>
> > > > > > > > > > Error while connecting to host, No connection could be made<br>
> > > > because<br>
> > > > > > the<br>
> > > > > > > > > > target machine actively refused it. (10061)<br>
> > > > > > > > > > Connect on sock (host=Tharsis, port=8676) failed, exhaused<br>
> > all<br>
> > > > end<br>
> > > > > > > > points<br>
> > > > > > > > > > Unable to connect to 'Tharsis:8676',<br>
> > > > > > > > > > sock error: Error = -1<br>
> > > > > > > > > ><br>
> > > > > > > > > > Completed test examples<br>
> > > > > > > > > ><br>
> > > > > > > > > ><br>
> > > > > > > > > > On Thu, Jul 22, 2010 at 4:13 PM, Satish Balay <<br>
> > > > <a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>><br>
> > > > > > > > wrote:<br>
> > > > > > > > > ><br>
> > > > > > > > > > > On Thu, 22 Jul 2010, Dominik Szczerba wrote:<br>
> > > > > > > > > > ><br>
> > > > > > > > > > > > Many thanks for your precious feedback.<br>
> > > > > > > > > > > > My MPICH install is 64 bit but it seems that for some<br>
> > > > reason 32<br>
> > > > > > bit<br>
> > > > > > > > VC<br>
> > > > > > > > > > > > compiler is invoked (I have both 32 and 64 installed).<br>
> > > > > > > > > > ><br>
> > > > > > > > > > > As mentioned - whichever compiler is first in the PATH is<br>
> > > > used<br>
> > > > > > > > > > > cl<br>
> > > > > > > > > > ><br>
> > > > > > > > > > > > I am clarifying with a local MSVC expert how to control<br>
> > > > this,<br>
> > > > > > will<br>
> > > > > > > > update<br>
> > > > > > > > > > > > you later today.<br>
> > > > > > > > > > ><br>
> > > > > > > > > > > One way to control this - is to run the desired 'build<br>
> > env'<br>
> > > > cmd -<br>
> > > > > > as<br>
> > > > > > > > > > > mentioned in the installation instructions.<br>
> > > > > > > > > > ><br>
> > > > > > > > > > ><br>
> > > > > > > ><br>
> > > > > ><br>
> > > ><br>
> > <a href="http://www.mcs.anl.gov/petsc/petsc-as/documentation/installation.html#Windows" target="_blank">http://www.mcs.anl.gov/petsc/petsc-as/documentation/installation.html#Windows</a><br>
> > > > > > > > > > ><br>
> > > > > > > > > > > Satish<br>
> > > > > > > > > > ><br>
> > > > > > > > > > > > Dominik<br>
> > > > > > > > > > > ><br>
> > > > > > > > > > > > On Thu, Jul 22, 2010 at 3:45 PM, Satish Balay <<br>
> > > > > > <a href="mailto:balay@mcs.anl.gov">balay@mcs.anl.gov</a>><br>
> > > > > > > > wrote:<br>
> > > > > > > > > > > ><br>
> > > > > > > > > > > > > > sh: Warning: win32fe: File Not Found:<br>
> > > > /cygdrive/c/Program<br>
> > > > > > > > > > > > > > Files/MPICH2/lib/amd64/msmpi.lib<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > Looks like - if win32fe doesn't find the file - it<br>
> > > > doesn't<br>
> > > > > > try to<br>
> > > > > > > > > > > > > convert the path. This is not the cause of his<br>
> > configure<br>
> > > > > > failure.<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > The primary issue is: [which is much ahead in<br>
> > > > configure.log]<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > >>>>>>>>>>><br>
> > > > > > > > > > > > > sh:<br>
> > > > > > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > > > > > > > > > > cl<br>
> > > > > > > > > > > > > -o conftest.exe -MT -wd4996 conftest.o<br>
> > > > > > /cygdrive/c/Program\<br>
> > > > > > > > > > > > > Files/MPICH2/lib/mpi.lib Ws2_32.lib<br>
> > > > > > > > > > > > > Executing:<br>
> > > > > > > > > > > > ><br>
> > > > > > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > > > cl<br>
> > > > > > > > > > > -o<br>
> > > > > > > > > > > > > conftest.exe -MT -wd4996 conftest.o<br>
> > > > /cygdrive/c/Program\<br>
> > > > > > > > > > > > > Files/MPICH2/lib/mpi.lib Ws2_32.lib<br>
> > > > > > > > > > > > > sh: conftest.obj : error LNK2019: unresolved external<br>
> > > > symbol<br>
> > > > > > > > _MPI_Init<br>
> > > > > > > > > > > > > referenced in function _main^M<br>
> > > > > > > > > > > > > C:\Users\Dominik\Programs\PETSC-~1.1-P\conftest.exe :<br>
> > > > fatal<br>
> > > > > > error<br>
> > > > > > > > > > > LNK1120:<br>
> > > > > > > > > > > > > 1 unresolved externals^M<br>
> > > > > > > > > > > > > <<<<<<<<<<<<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > Here cl is finding the correct library - but not<br>
> > MPI_Init<br>
> > > > > > symbol<br>
> > > > > > > > in it.<br>
> > > > > > > > > > > > > For whatever reason - libmpi.lib is not compatible.<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > Satish<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > On Thu, 22 Jul 2010, Farshid Mossaiby wrote:<br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > I doubt 'cl' can interpret Cygwin paths:<br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > cl : Command line warning D9002 : ignoring unknown<br>
> > > > option<br>
> > > > > > > > > > > > > > '/cygdrive/c/Program<br>
> > Files/MPICH2/lib/amd64/msmpi.lib'<br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > Shouldn't win32fe convert this path first?<br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > Hope this helps.<br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > --- On Wed, 7/21/10, Dominik Szczerba <<br>
> > > > > > <a href="mailto:dominik@itis.ethz.ch">dominik@itis.ethz.ch</a>><br>
> > > > > > > > wrote:<br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > From: Dominik Szczerba <<a href="mailto:dominik@itis.ethz.ch">dominik@itis.ethz.ch</a>><br>
> > > > > > > > > > > > > > > Subject: Re: [petsc-users] configure problems<br>
> > > > > > > > > > > > > > > To: "PETSc users list" <<a href="mailto:petsc-users@mcs.anl.gov">petsc-users@mcs.anl.gov</a>><br>
> > > > > > > > > > > > > > > Date: Wednesday, July 21, 2010, 7:01 PM<br>
> > > > > > > > > > > > > > > Coming back to the original problem:<br>
> > > > > > > > > > > > > > > I tried to compile MPICH2 myself<br>
> > > > > > > > > > > > > > > and failed because of wrong version of automake<br>
> > in<br>
> > > > > > Cygwin.<br>
> > > > > > > > > > > > > > > I then<br>
> > > > > > > > > > > > > > > installed the Windows binary available on the<br>
> > mpich2<br>
> > > > > > > > > > > > > > > webpage. I<br>
> > > > > > > > > > > > > > > configure petsc with:<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > $ ./config/configure.py PETSC_DIR=$PWD<br>
> > > > > > > > > > > > > > > PETSC_ARCH=win64-msvc-release<br>
> > > > > > > > > > > > > > > --download-c-blas-lapack=1<br>
> > > > > > > > > > > > > > > --with-mpi-dir='/cygdrive/c/Program<br>
> > > > > > > > > > > > > > > Files/MPICH2' --with-x=0 --with-debugging=0<br>
> > > > > > > > > > > > > > > --with-cc='win32fe cl'<br>
> > > > > > > > > > > > > > > --with-fc=0<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > to hear at the end (of a very long configuration<br>
> > > > > > > > > > > > > > > process...):<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > sh:<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > > > > > > > > > > > > > > cl -o conftest.exe -MT -wd4996<br>
> > > > > > > > > > > > > > > conftest.o /cygdrive/c/Program\<br>
> > > > > > > > > > > > > > > Files/MPICH2/lib/amd64/msmpi.lib Ws2_32.lib<br>
> > > > > > > > > > > > > > > Executing:<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > ><br>
> > /cygdrive/c/Users/Dominik/Programs/petsc-3.1-p3/bin/win32fe/win32fe<br>
> > > > > > > > > > > > > > > cl -o conftest.exe -MT -wd4996<br>
> > > > > > > > > > > > > > > conftest.o /cygdrive/c/Program\<br>
> > > > > > > > > > > > > > > Files/MPICH2/lib/amd64/msmpi.lib Ws2_32.lib<br>
> > > > > > > > > > > > > > > sh: Warning: win32fe: File Not Found:<br>
> > > > /cygdrive/c/Program<br>
> > > > > > > > > > > > > > > Files/MPICH2/lib/amd64/msmpi.lib<br>
> > > > > > > > > > > > > > > cl : Command line warning D9002 : ignoring<br>
> > unknown<br>
> > > > option<br>
> > > > > > > > > > > > > > > '/cygdrive/c/Program<br>
> > > > Files/MPICH2/lib/amd64/msmpi.lib'<br>
> > > > > > > > > > > > > > > conftest.obj : error LNK2019: unresolved external<br>
> > > > symbol<br>
> > > > > > > > > > > > > > > _MPI_Init<br>
> > > > > > > > > > > > > > > referenced in function _main<br>
> > > > > > > > > > > > > > ><br>
> > C:\Users\Dominik\Programs\PETSC-~1.1-P\conftest.exe :<br>
> > > > > > fatal<br>
> > > > > > > > > > > > > > > error<br>
> > > > > > > > > > > > > > > LNK1120: 1 unresolved externals<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > Any directions why would the configuration look<br>
> > for a<br>
> > > > > > > > > > > > > > > nonexistent<br>
> > > > > > > > > > > > > > > library? The contents of the installation folder<br>
> > are:<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > $ ls -la /cygdrive/c/Program\ Files/MPICH2/lib/<br>
> > > > > > > > > > > > > > > total 808<br>
> > > > > > > > > > > > > > > drwx------+ 1 SYSTEM SYSTEM 4096<br>
> > > > > > > > > > > > > > > 2010-07-21 15:54 .<br>
> > > > > > > > > > > > > > > drwx------+ 1 SYSTEM SYSTEM 4096<br>
> > > > > > > > > > > > > > > 2010-07-21 15:54 ..<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 4644<br>
> > > > > > > > > > > > > > > 2010-02-22 17:13 TraceInput.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 322820 2010-02-22<br>
> > 17:09<br>
> > > > > > > > > > > > > > > cxx.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 131316 2010-02-22<br>
> > 17:11<br>
> > > > > > > > > > > > > > > fmpich2.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 136382 2010-02-22<br>
> > 17:13<br>
> > > > > > > > > > > > > > > fmpich2g.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 1936<br>
> > > > > > > > > > > > > > > 2010-02-22 17:13 irlog2rlog.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 10430 2010-02-22<br>
> > 16:30<br>
> > > > > > > > > > > > > > > mpe.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 132128 2010-02-22<br>
> > 16:29<br>
> > > > > > > > > > > > > > > mpi.lib<br>
> > > > > > > > > > > > > > > -rwx------+ 1 SYSTEM SYSTEM 61286 2010-02-22<br>
> > 16:30<br>
> > > > > > > > > > > > > > > rlog.lib<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > Best regards,<br>
> > > > > > > > > > > > > > > Dominik<br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > On Tue, Jul 20, 2010 at 12:44 AM, Jed Brown <<br>
> > > > > > <a href="mailto:jed@59a2.org">jed@59a2.org</a>><br>
> > > > > > > > > > > > > > > wrote:<br>
> > > > > > > > > > > > > > > > On Tue, 20 Jul 2010 08:37:18 +1000, Matthew<br>
> > Knepley<br>
> > > > > > > > > > > > > > > <<a href="mailto:knepley@gmail.com">knepley@gmail.com</a>><br>
> > > > > > > > > > > > > > > wrote:<br>
> > > > > > > > > > > > > > > >> This would do you absolutely no good. Even<br>
> > Jed's<br>
> > > > > > > > > > > > > > > thing needs all the<br>
> > > > > > > > > > > > > > > >> information that the configure provides. CMake<br>
> > is<br>
> > > > > > > > > > > > > > > exactly what it<br>
> > > > > > > > > > > > > > > >> says, make. It does no configuration<br>
> > > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > > This isn't true, CMake isn't a build system at<br>
> > all,<br>
> > > > it<br>
> > > > > > > > > > > > > > > does<br>
> > > > > > > > > > > > > > > > configuration and produces build files for<br>
> > another<br>
> > > > > > > > > > > > > > > tool (like make or an<br>
> > > > > > > > > > > > > > > > IDE). I see no point in maintaining duplicate<br>
> > > > > > > > > > > > > > > configuration systems,<br>
> > > > > > > > > > > > > > > > and CMake's scripting language is so attrocious<br>
> > > > that<br>
> > > > > > > > > > > > > > > "replacing"<br>
> > > > > > > > > > > > > > > > BuildSystem with CMake script would be a<br>
> > disaster.<br>
> > > > > > > > > > > > > > > It's<br>
> > > > > > > > > > > > > > > > cross-compilation support is also a bit weak,<br>
> > and<br>
> > > > > > > > > > > > > > > there are a pile of<br>
> > > > > > > > > > > > > > > > other things that it does poorly (mostly<br>
> > related to<br>
> > > > > > > > > > > > > > > pathologically<br>
> > > > > > > > > > > > > > > > dysfunctional "Find*.cmake" modules). That<br>
> > doesn't<br>
> > > > > > > > > > > > > > > mean it isn't useful<br>
> > > > > > > > > > > > > > > > for producing build files.<br>
> > > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > > Jed<br>
> > > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > > ><br>
> > > > > > > > > > > > ><br>
> > > > > > > > > > > ><br>
> > > > > > > > > > ><br>
> > > > > > > > > > ><br>
> > > > > > > > > ><br>
> > > > > > > > ><br>
> > > > > > > > ><br>
> > > > > > > ><br>
> > > > > > > ><br>
> > > > > > ><br>
> > > > > ><br>
> > > > > ><br>
> > > > ><br>
> > > ><br>
> > > ><br>
> > ><br>
> ><br>
> ><br>
><br>
<br>
</div></div></blockquote></div><br>