[Nek5000-users] Nek5000-users Digest, Vol 111, Issue 26

[nek5000-users at lists.mcs.anl.gov]

Re: Converting problem from .msh to NEK5000 format


  1.  is your fluent mesh in binary format ? I think you should have it ascii format.
  2.  or, as an alternative, you should try exo2nek utility. if you have access to ICEM, you could import your mesh in ICEM, and export your mesh to exodus format. Then exo2nek will convert it to re2 format.



Haomin (Kirk) Yuan

________________________________
From: Nek5000-users <nek5000-users-bounces at lists.mcs.anl.gov> on behalf of nek5000-users-request at lists.mcs.anl.gov <nek5000-users-request at lists.mcs.anl.gov>
Sent: Tuesday, May 29, 2018 12:00:13 PM
To: nek5000-users at lists.mcs.anl.gov
Subject: Nek5000-users Digest, Vol 111, Issue 26

Send Nek5000-users mailing list submissions to
        nek5000-users at lists.mcs.anl.gov

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users
or, via email, send a message with subject or body 'help' to
        nek5000-users-request at lists.mcs.anl.gov

You can reach the person managing the list at
        nek5000-users-owner at lists.mcs.anl.gov

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Nek5000-users digest..."


Today's Topics:

   1. Converting problem from .msh to NEK5000 format
      (nek5000-users at lists.mcs.anl.gov)


----------------------------------------------------------------------

Message: 1
Date: Tue, 29 May 2018 16:28:32 +0200 (CEST)
From: nek5000-users at lists.mcs.anl.gov
To: nek5000-users <nek5000-users at lists.mcs.anl.gov>
Subject: [Nek5000-users] Converting problem from .msh to NEK5000
        format
Message-ID:
        <mailman.2678.1527604367.86639.nek5000-users at lists.mcs.anl.gov>
Content-Type: text/plain; charset="utf-8"

Hello Neks,

I have mesh file .msh format and I was trying to convert into NEK5000 format using mshconvert.py but I face some troubles in the function of scan_fluent_mesh.

I get this error : IOError: Something went wrong reading fluent mesh.

Could you please tell me why?

I can send you the mesh file and it may help you understand the problem.

Do I have to change anything in the .msh file normally?


Thanks

Sijo GEORGE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20180529/67eedc6b/attachment-0001.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Nek5000-users mailing list
Nek5000-users at lists.mcs.anl.gov
https://lists.mcs.anl.gov/mailman/listinfo/nek5000-users


------------------------------

End of Nek5000-users Digest, Vol 111, Issue 26
**********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mcs.anl.gov/pipermail/nek5000-users/attachments/20180529/856c874a/attachment.html>