<br><font size=2 face="sans-serif">Yeah, I put it in the wrong directory.
Ok, I reran in a shared area and I've attached the log file.</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif">Thanks,</font>
<br><font size=2 face="sans-serif"><br>
Andy Holland<br>
Air Quality Modeler<br>
URS Corporation<br>
1600 Perimeter Park Drive<br>
Suite 400<br>
Morrisville, NC 27560<br>
Direct: (303) 796-4694<br>
Cell: (919) 619-4218<br>
Fax: (919) 461-1415<br>
andy_holland@urscorp.com</font>
<br><font size=2 face="sans-serif"><br>
</font>
<table>
<tr>
<td><font size=1 color=#4f4f4f face="sans-serif">This e-mail and any attachments
contain URS Corporation confidential information that may be proprietary
or privileged. If you receive this message in error or are not the intended
recipient, you should not retain, distribute, disclose or use any of this
information and you should destroy the e-mail and any attachments or copies.</font></table>
<br><font size=2 face="sans-serif"><br>
<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=48%><font size=1 face="sans-serif"><b>Darius Buntinas <buntinas@mcs.anl.gov></b>
</font>
<br><font size=1 face="sans-serif">Sent by: mpich-discuss-bounces@mcs.anl.gov</font>
<p><font size=1 face="sans-serif">04/25/2011 05:45 PM</font>
<table border>
<tr valign=top>
<td bgcolor=white>
<div align=center><font size=1 face="sans-serif">Please respond to<br>
mpich-discuss@mcs.anl.gov</font></div></table>
<br>
<br>
<td width=51%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">mpich-discuss@mcs.anl.gov</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [mpich-discuss] Possible setup problem</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><tt><font size=2><br>
Andy,<br>
<br>
Looking through the log file, I see a line that says:<br>
<br>
[proxy:0:1@s051rhlapp02] launch_procs (/usr/local/mpich2-1.3.2p1/src/pm/hydra/pm/pmiserv/pmip_cb.c:639):
unable to change wdir to /home/andy_holland/mpich_test (No such file or
directory)<br>
<br>
Can you check that you can access /home/andy_holland/mpich_test from s051rhlapp02
?<br>
<br>
If not, put simple_test into a directory that's accessible from both machines,
and try it again.<br>
<br>
Thanks,<br>
-d<br>
<br>
On Apr 25, 2011, at 3:55 PM, Andy_Holland@URSCorp.com wrote:<br>
<br>
> <br>
> Daruis, <br>
> Thanks. If I had just thought for
a second longer I would have had it. Attached is the log file for
your test program. <br>
> <br>
> <br>
> <br>
> Andy Holland<br>
> Air Quality Modeler<br>
> URS Corporation<br>
> 1600 Perimeter Park Drive<br>
> Suite 400<br>
> Morrisville, NC 27560<br>
> Direct: (303) 796-4694<br>
> Cell: (919) 619-4218<br>
> Fax: (919) 461-1415<br>
> andy_holland@urscorp.com <br>
> <br>
> This e-mail and any attachments contain URS Corporation confidential
information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not retain,
distribute, disclose or use any of this information and you should destroy
the e-mail and any attachments or copies.<br>
> <br>
> <br>
> <br>
> <br>
> <br>
> <br>
> Darius Buntinas <buntinas@mcs.anl.gov> <br>
> Sent by: mpich-discuss-bounces@mcs.anl.gov<br>
> 04/25/2011 04:32 PM<br>
> Please respond to<br>
> mpich-discuss@mcs.anl.gov<br>
> <br>
> <br>
> To<br>
> mpich-discuss@mcs.anl.gov<br>
> cc<br>
> Subject<br>
> Re: [mpich-discuss] Possible setup problem<br>
> <br>
> <br>
> <br>
> <br>
> <br>
> <br>
> Sorry. Just run:<br>
> mpicc simple_test.c -o simple_test<br>
> <br>
> If you needed to specify the full path for mpiexec, use the same path
for mpicc. This will generate the executable called simple_test.<br>
> <br>
> -d<br>
> <br>
> <br>
> On Apr 25, 2011, at 3:26 PM, Andy_Holland@URSCorp.com wrote:<br>
> <br>
> > <br>
> > Darius, <br>
> > Thanks for your help with this. You'll
have to forgive me though, I'm a Fortran programmer and I'm not exactly
sure how to compile the program you sent me. I have gcc by the way.
<br>
> > <br>
> > Thanks, <br>
> > <br>
> > Andy Holland<br>
> > Air Quality Modeler<br>
> > URS Corporation<br>
> > 1600 Perimeter Park Drive<br>
> > Suite 400<br>
> > Morrisville, NC 27560<br>
> > Direct: (303) 796-4694<br>
> > Cell: (919) 619-4218<br>
> > Fax: (919) 461-1415<br>
> > andy_holland@urscorp.com <br>
> > <br>
> > This e-mail and any attachments contain URS Corporation confidential
information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not retain,
distribute, disclose or use any of this information and you should destroy
the e-mail and any attachments or copies.<br>
> > <br>
> > <br>
> > <br>
> > <br>
> > <br>
> > <br>
> > Darius Buntinas <buntinas@mcs.anl.gov> <br>
> > Sent by: mpich-discuss-bounces@mcs.anl.gov<br>
> > 04/25/2011 03:19 PM<br>
> > Please respond to<br>
> > mpich-discuss@mcs.anl.gov<br>
> > <br>
> > <br>
> > To<br>
> > mpich-discuss@mcs.anl.gov<br>
> > cc<br>
> > Subject<br>
> > Re: [mpich-discuss] Possible setup problem<br>
> > <br>
> > <br>
> > <br>
> > <br>
> > <br>
> > <br>
> > OK, can you try the attached test program with the same number
of processes and machine file, but also add the -l option to mpiexec (to
label the lines of output with the rank).<br>
> > <br>
> > Thanks,<br>
> > -d<br>
> > <br>
> > <br>
> > [attachment "simple_test.c" deleted by Andy Holland/Denver/URSCorp]
<br>
> > On Apr 25, 2011, at 2:00 PM, Andy_Holland@URSCorp.com wrote:<br>
> > <br>
> > > <br>
> > > I've attached the log for running cpi using the same machinefile.
<br>
> > > <br>
> > > <br>
> > > <br>
> > > Thank you, <br>
> > > <br>
> > > Andy Holland<br>
> > > Air Quality Modeler<br>
> > > URS Corporation<br>
> > > 1600 Perimeter Park Drive<br>
> > > Suite 400<br>
> > > Morrisville, NC 27560<br>
> > > Direct: (303) 796-4694<br>
> > > Cell: (919) 619-4218<br>
> > > Fax: (919) 461-1415<br>
> > > andy_holland@urscorp.com <br>
> > > <br>
> > > This e-mail and any attachments contain URS Corporation
confidential information that may be proprietary or privileged. If you
receive this message in error or are not the intended recipient, you should
not retain, distribute, disclose or use any of this information and you
should destroy the e-mail and any attachments or copies.<br>
> > > <br>
> > > <br>
> > > <br>
> > > <br>
> > > <br>
> > > <br>
> > > Darius Buntinas <buntinas@mcs.anl.gov> <br>
> > > Sent by: mpich-discuss-bounces@mcs.anl.gov<br>
> > > 04/25/2011 02:51 PM<br>
> > > Please respond to<br>
> > > mpich-discuss@mcs.anl.gov<br>
> > > <br>
> > > <br>
> > > To<br>
> > > mpich-discuss@mcs.anl.gov<br>
> > > cc<br>
> > > Subject<br>
> > > Re: [mpich-discuss] Possible setup problem<br>
> > > <br>
> > > <br>
> > > <br>
> > > <br>
> > > <br>
> > > Hi Andy,<br>
> > > <br>
> > > Can you try running cpi from the examples directory of the
MPICH2 source tree with the same number of processes and the same machine
file? Let us know if that works, and, if not, send us the output,
please.<br>
> > > <br>
> > > Thanks,<br>
> > > -d<br>
> > > <br>
> > > On Apr 25, 2011, at 1:30 PM, Andy_Holland@URSCorp.com wrote:<br>
> > > <br>
> > > > <br>
> > > > It was suggested that I send out all the error messages.
I've attached a log file from the model. <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > Thank you, <br>
> > > > <br>
> > > > Andy Holland<br>
> > > > Air Quality Modeler<br>
> > > > URS Corporation<br>
> > > > 1600 Perimeter Park Drive<br>
> > > > Suite 400<br>
> > > > Morrisville, NC 27560<br>
> > > > Direct: (303) 796-4694<br>
> > > > Cell: (919) 619-4218<br>
> > > > Fax: (919) 461-1415<br>
> > > > andy_holland@urscorp.com <br>
> > > > <br>
> > > > This e-mail and any attachments contain URS Corporation
confidential information that may be proprietary or privileged. If you
receive this message in error or are not the intended recipient, you should
not retain, distribute, disclose or use any of this information and you
should destroy the e-mail and any attachments or copies.<br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > Dave Goodell <goodell@mcs.anl.gov> <br>
> > > > Sent by: mpich-discuss-bounces@mcs.anl.gov<br>
> > > > 04/25/2011 02:22 PM<br>
> > > > Please respond to<br>
> > > > mpich-discuss@mcs.anl.gov<br>
> > > > <br>
> > > > <br>
> > > > To<br>
> > > > mpich-discuss@mcs.anl.gov<br>
> > > > cc<br>
> > > > Subject<br>
> > > > Re: [mpich-discuss] Possible setup problem<br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > <br>
> > > > On Apr 25, 2011, at 12:59 PM CDT, Andy_Holland@URSCorp.com
wrote:<br>
> > > > <br>
> > > > > When I run from either machine using CPUs from
both machines the run stops with many mpi messages. Below is the
last message in the list: <br>
> > > > > <br>
> > > > > main (/usr/local/mpich2-1.3.2p1/src/pm/hydra/ui/mpich/mpiexec.c:404):
process manager error waiting for completion <br>
> > > > <br>
> > > > Can you send us all of the error messages? Typically
the first error messages are the most useful/relevant; the last ones often
are just messages announcing some sort of cleanup or secondary error caused
by the original error.<br>
> > > > <br>
> > > > -Dave<br>
> > > > <br>
> > > > _______________________________________________<br>
> > > > mpich-discuss mailing list<br>
> > > > mpich-discuss@mcs.anl.gov<br>
> > > > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> > > > <br>
> > > > <run.cctm.parallel.txt>_______________________________________________<br>
> > > > mpich-discuss mailing list<br>
> > > > mpich-discuss@mcs.anl.gov<br>
> > > > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> > > <br>
> > > _______________________________________________<br>
> > > mpich-discuss mailing list<br>
> > > mpich-discuss@mcs.anl.gov<br>
> > > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> > > <br>
> > > <cpi_log.txt>_______________________________________________<br>
> > > mpich-discuss mailing list<br>
> > > mpich-discuss@mcs.anl.gov<br>
> > > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> > <br>
> > _______________________________________________<br>
> > mpich-discuss mailing list<br>
> > mpich-discuss@mcs.anl.gov<br>
> > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> > <br>
> > _______________________________________________<br>
> > mpich-discuss mailing list<br>
> > mpich-discuss@mcs.anl.gov<br>
> > https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> <br>
> _______________________________________________<br>
> mpich-discuss mailing list<br>
> mpich-discuss@mcs.anl.gov<br>
> https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
> <br>
> <simple_test_log.txt>_______________________________________________<br>
> mpich-discuss mailing list<br>
> mpich-discuss@mcs.anl.gov<br>
> https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
<br>
_______________________________________________<br>
mpich-discuss mailing list<br>
mpich-discuss@mcs.anl.gov<br>
https://lists.mcs.anl.gov/mailman/listinfo/mpich-discuss<br>
</font></tt>
<br>