<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7036.0">
<TITLE>RE: A question about configuring MPICH2 with smpd</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2> Hi,<BR>
What is the error that you get (after installing openssl) when you run configure/make (Provide us with the configure.log -- the output of configure command, config.log & make.log -- output of make command)?<BR>
<BR>
Regards,<BR>
Jayesh<BR>
<BR>
-----Original Message-----<BR>
From: Rajeev Thakur [<A HREF="mailto:thakur@mcs.anl.gov">mailto:thakur@mcs.anl.gov</A>]<BR>
Sent: Thursday, July 24, 2008 8:39 AM<BR>
To: 'Jayesh Krishna'<BR>
Subject: FW: A question about configuring MPICH2 with smpd<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
Date: Wed, 23 Jul 2008 16:09:11 -0700 (PDT)<BR>
Message-Id: <200807232309.m6NN9BTq029512@melipona.ucdavis.edu><BR>
To: mpich-discuss@mcs.anl.gov<BR>
Subject: A question about configuring MPICH2 with smpd<BR>
From: "Yu-Cheng Chou" <cycchou@ucdavis.edu><BR>
X-Errors-To: cycchou@ms13.ucdavis.edu<BR>
X-Mailer: Geckomail-b16<BR>
X-Originating-IP: [169.237.108.53]<BR>
X-User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.13)<BR>
Gecko/20080311 Firefox/2.0.0.13<BR>
X-Virus-Scanned: ClamAV version 0.93.3, clamav-milter version 0.93.3 on av2<BR>
X-Virus-Status: Clean<BR>
X-Scanned-By: MIMEDefang 2.57 on 128.120.32.31<BR>
X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at mailgw.mcs.anl.gov<BR>
X-Spam-Status: No, hits=0.0 required=5.0<BR>
tests=none<BR>
version=2.55<BR>
X-Spam-Level:<BR>
X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp)<BR>
X-MCS-Mail-Loop: mpich-discuss<BR>
<BR>
<BR>
Hi,<BR>
<BR>
I was trying to install MPICH2 with smpd under my home directory on a 64-bit linux computer.<BR>
<BR>
When i was configuring MPICH2, I got an error saying that SMPD needs MD5 support. Therefore, I installed openssl, which provides MD5 support, under my home directory.<BR>
<BR>
I tried to specify the path of that openssl in the configuration process using the LDFLAGS, MPICH2_LDFLAGS, CFLAGS, MPICH2_CFLAGS options. However I could not get it right. I got the same error as before.<BR>
<BR>
So, how to correctly specify the path of the openssl which is under my home directory so that MD5 support can be found in the configuration process?<BR>
<BR>
Thank you very much<BR>
<BR>
-Yucheng<BR>
<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>