<div dir="ltr"><div><br>Gurcharan</div>
<div> </div>
<div>well, I can confirm that multicast is working as i can see the multicast address group in the DVTS Receiver window</div>
<div> </div>
<div>I&#39;m streaming now again , if you&#39;re there you can check again my video </div>
<div> </div>
<div>Regards </div>
<div> </div>
<div>Muhammad<br></div>
<div class="gmail_quote">On Sun, Jul 19, 2009 at 3:40 PM, Gurcharan S. Khanna <span dir="ltr">&lt;<a href="mailto:gurcharan.khanna@rit.edu">gurcharan.khanna@rit.edu</a>&gt;</span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">muhammad,<br><br>3.2-Beta! I wish I had noticed that earlier! Yes, definitely stay away from that.<br>There are known problems both with DVTS (and H264) in the beta.<br>
<br>Now that you&#39;ve discovered that, I have to say I have never seen the kind of<br>artifacts that you show us in your DVTS image.<br><br>I&#39;m connected to your sever now but I guess you must have turned off your<br>
stream. I will check it again later.<br><br>Also, you should check trying to receive an external stream as well. If you go<br>to the RIT Venue at <a href="https://vv3.mcs.anl.gov:8000/Venues/8cdd226521d429b68e7e8c0158a6a663" target="_blank">https://vv3.mcs.anl.gov:8000/Venues/8cdd226521d429b68e7e8c0158a6a663</a><br>
there should be several DVTS streams available.<br><br>As John said in an earlier email, make sure multicast is working (there are<br>independent ways to test that). But it looks like something in your machine<br>or local network possibly.<br>
<br>-gurcharan<br><br>muhammad akl wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div class="im">hi Gurcharan, John<br> Firstly appreciated your help both , I think now the problem has taken another curve , i mean i&#39;ve downgraded AccessGrid version from 3.2-Beta to AccessGrid 3.1 stable release ( also using the easyinstaller package) , and as i previously did , i&#39;ve configured AccessGrid on the sender Pc to use the ExtendedVideoProducerService and again i can see my video signal fine without any problem<br>
 Now at the receiver Pc , I&#39;ve configured it to use the ExtendedVideoConsumerService and now it pops up the DVTS screen and I can see the stream sent by my sender pc , and did as Gurcharan said , that I clicked on each of those text lines and the DVTS window was brought up with the following problem within it :<br>
 <a href="http://muhammad.akl.googlepages.com/19072009367.jpg" target="_blank">http://muhammad.akl.googlepages.com/19072009367.jpg</a><br> As you can see the video is corrupted and is not clear , what can cause this problem ?<br>
</div>my AccessGrid Server url is <a href="https://ag0.mans.edu.eg/" target="_blank">https://ag0.mans.edu.eg</a> &lt;<a href="https://ag0.mans.edu.eg/" target="_blank">https://ag0.mans.edu.eg/</a>&gt; 
<div class="im"><br> Our Bridge Name : Mansoura University<br> Regards<br> Muhammad<br></div>
<div class="im">On Sun, Jul 19, 2009 at 2:08 AM, John I. Quebedeaux, Jr &lt;<a href="mailto:johnq@lsu.edu" target="_blank">johnq@lsu.edu</a> &lt;mailto:<a href="mailto:johnq@lsu.edu" target="_blank">johnq@lsu.edu</a>&gt;&gt; wrote:<br>
<br>   Muhammad, on Monday I can put up a DVTS stream into a lobby (let<br>   me know which you’re playing in, there are several these days –<br>   Louisiana has their own for example) and see what’s up.<br><br>   Confirm you have multicast working...<br>
<br>   It’s not clear from you on the display (receiver) machine if DVTS<br>   is starting, if you’re getting errors, etc. Is it starting but not<br>   showing anything? Can you confirm the multicast addresses<br>   involved? Are you getting “video” but it’s black for example?<br>
<br>   Thanks,<br><br>   John Q.<br><br>   --    John I. Quebedeaux, Jr.; Louisiana State University<br>   Computer Manager LBRN; 131 Life Sciences Bldg.<br></div>   e-mail: <a href="mailto:johnq@lsu.edu" target="_blank">johnq@lsu.edu</a> &lt;<a href="http://johnq/" target="_blank">http://johnq</a>@<a href="http://lsu.edu/" target="_blank">lsu.edu/</a>&gt;; web:<br>
   <a href="http://lbrn.lsu.edu/" target="_blank">http://lbrn.lsu.edu</a> &lt;<a href="http://lbrn.lsu.edu/" target="_blank">http://lbrn.lsu.edu/</a>&gt; 
<div class="im"><br>   phone: 225-578-0062 / fax: 225-578-2597<br><br>   ------------------------------------------------------------------------<br>   *From: *muhammad akl &lt;<a href="mailto:muhammad.akl@gmail.com" target="_blank">muhammad.akl@gmail.com</a><br>
</div>   &lt;<a href="http://muhammad.akl/" target="_blank">http://muhammad.akl</a>@<a href="http://gmail.com/" target="_blank">gmail.com/</a>&gt;&gt; 
<div class="im"><br>   *Date: *Sat, 18 Jul 2009 19:39:16 +0300<br>   *To: *Gurcharan Khanna &lt;<a href="mailto:gurcharan.khanna@rit.edu" target="_blank">gurcharan.khanna@rit.edu</a><br></div>   &lt;<a href="http://gurcharan.khanna/" target="_blank">http://gurcharan.khanna</a>@<a href="http://rit.edu/" target="_blank">rit.edu/</a>&gt;&gt;<br>
   *Cc: *&lt;<a href="mailto:ag-tech@mcs.anl.gov" target="_blank">ag-tech@mcs.anl.gov</a> &lt;<a href="http://ag-tech/" target="_blank">http://ag-tech</a>@<a href="http://mcs.anl.gov/" target="_blank">mcs.anl.gov/</a>&gt;&gt; 
<div>
<div></div>
<div class="h5"><br>   *Subject: *Re: [AG-TECH] sending dv/hdv via accessgrid all in one<br><br><br>   hi Gurcharan,<br>       well, the problem mainly is that i&#39;m unable to receive my video<br>   signal at the receiver side , which actually i can see it via DVTS<br>
   program at the sending side<br>       let&#39;s explain my setup in more details , i&#39;ve two pcs their specs<br>   as follows :<br>       Sender PC<br>       OS : Windows XP SP3<br>       AccessGrid Ver : 3.2 Beta version ( All in one Installer made by<br>
   <a href="http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer" target="_blank">http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer</a>)<br>       Processor: Intel core 2 duo 2.3 GHZ<br>       Ram : 2 GB<br>       VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website )<br>
       Ethernet Type : Gigabit ethernet<br>       Firewire ports : External Pci card has two IEEE-1394 ports<br>       Input Camera : Sony DCR-TRV285E<br>       Receiver PC<br>   OS : Windows XP SP3<br>       AccessGrid Ver : 3.2 Beta version ( All in one Installer made by<br>
   <a href="http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer" target="_blank">http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer</a>)<br>       Processor : intel pentium D 3.4 GHZ<br>       Ram : 512 MB<br>
       VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website )<br>       Ethernet type : fast ethernet<br>           Now , The sender Pc is configured to Start sending Digital Video<br>   via ExtendedVideoServiceProducer Option which is found in the<br>
   AccessGrid node management menu , that i&#39;ve included during the<br>   installation of AccessGrid , And at this time i can see my video<br>   signal via DVTS program<br>       At the Receiver Side , I&#39;ve started AccessGrid and configured It<br>
   to use The ExtendedVideoConsumerService from AccessGrid node<br>   Management menu by adding a new service , and at this time i can<br>   not see anything , and no error messages appeared<br>       does my setup lacks something that&#39;s i&#39;ve fogotten to do , or does<br>
   i need much horse power for my PCS ?<br>       if though , what are the necessary steps to be done to be able to<br>   send and/or receive dv/hdv on windows xp ?<br>       Regards<br>       Muhammad<br>       On Sat, Jul 18, 2009 at 5:31 PM, Gurcharan S. Khanna<br>
</div></div>
<div>
<div></div>
<div class="h5">   &lt;<a href="mailto:gurcharan.khanna@rit.edu" target="_blank">gurcharan.khanna@rit.edu</a> &lt;<a href="http://gurcharan.khanna/" target="_blank">http://gurcharan.khanna</a>@<a href="http://rit.edu/" target="_blank">rit.edu/</a>&gt;&gt; wrote:<br>
<br>       hi,<br><br>       we use it constantly. can you give us more details about your<br>       problem?<br><br>       e.g., specific error messages?<br><br>       -gurcharan<br><br><br>       muhammad akl wrote:<br>
<br>           hello,<br>            I&#39;ve just installed the recent all in one accessgrid<br>           package on windows xp , the installation process went fine ,<br>           and i&#39;ve added the extended video services during the<br>
           installation as I want to start sedning dv/hdv video via<br>           firewire cameras ,<br>           after i&#39;ve joined the lobby , i&#39;ve configured the<br>           ExtendedVideoProducerService , and I can see my video fine<br>
           via the DVTS program ,<br>           but the problem that i&#39;m unable to receive it via<br>           ExtendedVideoConsumerService ,I&#39;ve tried several times to<br>           enable and disable the service with no luck<br>
            Anyone had a previous experience on how to get dv/hdv<br>           video on windows xp using this all in one (which includes<br>           the DVTS ) ?<br>            also anyone tried the enhanced vic that was made by<br>
           vislab team (chris willing ) on windows xp and successed<br>           to integrate it with accessgrid ?<br>              <br><br><br>       --        -------------------------<br>       Gurcharan S. Khanna, Ph.D.<br>
       Director of Research Computing<br>       Office of the Vice President for Research<br></div></div>       <a href="http://rc.rit.edu/" target="_blank">http://rc.rit.edu</a> &lt;<a href="http://rc.rit.edu/" target="_blank">http://rc.rit.edu/</a>&gt; &lt;<a href="http://rc.rit.edu/" target="_blank">http://rc.rit.edu/</a>&gt; 
<div class="im"><br><br>       Assistant Research Professor, Ph.D. Program<br>       Golisano College of Computing and Information Sciences<br>       <a href="http://people.rit.edu/gskpop" target="_blank">http://people.rit.edu/gskpop</a><br>
<br>       Director, Interactive Collaboration Environments Laboratory,<br>       Center for the Advancing the Study of Cyberinfrastructure<br>       <a href="http://icelab.rit.edu/" target="_blank">http://icelab.rit.edu</a> &lt;<a href="http://icelab.rit.edu/" target="_blank">http://icelab.rit.edu/</a>&gt;<br>
       &lt;<a href="http://icelab.rit.edu/" target="_blank">http://icelab.rit.edu/</a>&gt;<br>       ---<br>       Rochester Institute of Technology<br>       1 Lomb Memorial Drive<br>       Rochester, New York 14623-5603<br>
       Phone: 585-475-7504  ~  Cell: 585-451-8370<br></div>       Email: <a href="mailto:gurcharan.khanna@rit.edu" target="_blank">gurcharan.khanna@rit.edu</a> &lt;<a href="http://gurcharan.khanna/" target="_blank">http://gurcharan.khanna</a>@<a href="http://rit.edu/" target="_blank">rit.edu/</a>&gt;<br>
<br><br><br><br></blockquote>
<div class="im"><br><br>-- <br>-------------------------<br>Gurcharan S. Khanna, Ph.D.<br>Director of Research Computing<br>Office of the Vice President for Research<br><a href="http://rc.rit.edu/" target="_blank">http://rc.rit.edu</a><br>
<br></div>
<div class="im">Assistant Research Professor, Ph.D. Program<br>Golisano College of Computing and Information Sciences<br><a href="http://people.rit.edu/gskpop" target="_blank">http://people.rit.edu/gskpop</a><br><br>Director, Interactive Collaboration Environments Laboratory,<br>
Center for the Advancing the Study of Cyberinfrastructure<br><a href="http://icelab.rit.edu/" target="_blank">http://icelab.rit.edu</a><br></div>
<div>
<div></div>
<div class="h5">---<br>Rochester Institute of Technology<br>1 Lomb Memorial Drive<br>Rochester, New York 14623-5603<br>Phone: 585-475-7504  ~  Cell: 585-451-8370<br>Email: <a href="mailto:gurcharan.khanna@rit.edu" target="_blank">gurcharan.khanna@rit.edu</a><br>
<br></div></div></blockquote></div><br></div>