Ben,<br><br>The safest way to do it would probably be to configure AGVCR to playback to localhost but launch vic and rat manually yourself (ie, go to your VideoConsumerServiceH264 directory on the command line and do vic <a href="http://127.0.0.1/50002">127.0.0.1/50002</a>, and similar for RAT on <a href="http://127.0.0.1/50000">127.0.0.1/50000</a>), instead of doing 'launch stream apps' on AGVCR.<br>
<br>Just to clarify - are you doing just H264 or are you doing DVTS aka ExtendedVideo as well?<br><br>Doug - I know ExtendedVideo streams are always on their own IPs, but don't the H.264 services always point to the same IP and port as the normal vic services? That's what I've always seen.<br>
<br>--Andrew<br><br><div class="gmail_quote">2009/4/7 Ben Green <span dir="ltr"><<a href="mailto:ben.green@manchester.ac.uk">ben.green@manchester.ac.uk</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Just tried playing the recording back into a virtual venue (as opposed to localhost) with the default vic.exe and it plays back all streams, including the extended video services.<br>
<br>
So it may be something to do with the port numbers used with the AGVCR Local Playback configuration. They default as 50000 and 50002.<br>
<br>
If anyone has any more info on this, it'll be much appreciated. I need to demonstrate a recorded meeting tomorrow at a building with no internet connection, therefore need to play back locally.<br>
<br>
Cheers, Ben.<br>
<div class="im"><br>
-----Original Message-----<br>
From: <a href="mailto:ag-tech-bounces@lists.mcs.anl.gov">ag-tech-bounces@lists.mcs.anl.gov</a> [mailto:<a href="mailto:ag-tech-bounces@lists.mcs.anl.gov">ag-tech-bounces@lists.mcs.anl.gov</a>] On Behalf Of Douglas Kosovic<br>
Sent: 07 April 2009 11:59<br>
To: <a href="mailto:ben.green@manchester.ac.uk">ben.green@manchester.ac.uk</a><br>
Cc: <a href="mailto:ag-tech@mcs.anl.gov">ag-tech@mcs.anl.gov</a><br>
Subject: Re: [AG-TECH] Using AGVCR with latest Video Producer<br>
<br>
</div><div><div></div><div class="h5">Hi Ben,<br>
<br>
>>From what I can tell, the current AGVCR will not play back recorded video streams from an H264 or Extended Video service.<br>
><br>
> I'm guessing that it's because AGVCR uses an 'old' version of vic.exe<br>
><br>
> Has anyone tried 'upgrading' the vic.exe that AGVCR uses ?<br>
<br>
You didn't mention if you are using the AGVCR Launcher from the VenueClient or manually setting the host and port details for the audio and video streams within AGVCR.<br>
<br>
The H264 and Extended Video services are configured to use different ports than the standard H261 Video service, so I suspect that's the reason you aren't recording them.<br>
<br>
<br>
Doug<br>
<br>
</div></div></blockquote></div><br>