Gurcharan,<br><br>The only difference between the Intensity and Decklink cards format-wise is that the Decklink cards support 24PsF, which I don't think vic is using - all Blackmagic capture cards support 1080i50, 1080i60, 720p50 and 720p60. As Changhyeok said vic currently only supports 1920x1080 at 25fps, presumably meaning 1080i50, which is a PAL format.<br>
<br>--Andrew<br><br><div class="gmail_quote">2009/2/18 Gurcharan S. Khanna <span dir="ltr"><<a href="mailto:gurcharan.khanna@rit.edu">gurcharan.khanna@rit.edu</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Mike,<br>
<br>
are you using the Intensity Pro or the Decklink ExtremeHD card? i am suspecting<br>
there are differences between the two. i've seen 30 fps v 60 fps as the specs for the<br>
Decklink v. the Intensity come up on its GUI and don't know why this is the case.<br>
<br>
thanks,<br><font color="#888888">
<br>
-gurcharan</font><div><div></div><div class="Wj3C7c"><br>
<br>
<a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk" target="_blank">Mike.W.Daley@cs.cardiff.ac.uk</a> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
Hi All<br>
Just to clarify.<br>
I'm using a SONY HDR-SR12E camera.<br>
I've tested it both in PAL and NTSC formats at 1080i and its all fine.<br>
In resting phase. (very little activity) I'm getting 1.8M/s transfer rate.<br>
Mike<br>
<br>
Quoting Nathan Gardiner <<a href="mailto:nathan.gardiner@canterbury.ac.nz" target="_blank">nathan.gardiner@canterbury.ac.nz</a>>:<br>
<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
We have had problems trying to get an AVCHD camcorder to work with<br>
BlackMagic card and i think most AVCHD camcorders that I tested didn't<br>
seem to have true HDMI realtime output.<br>
<br>
I don't think that NTSC and PAL should make much difference as the<br>
BlackMagic card accepts input from either or.<br>
<br>
Also, we should have a new JVC camcorder arriving in the next day or<br>
so and will be testing that out.<br>
<br>
<br>
Regards,<br>
Nathan<br>
<br>
<br>
<br>
On 18/02/2009, at 11:56 AM, Jimmy Miklavcic wrote:<br>
<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I did check it a while back and it was fine. I had to install a graphics card in order for Media Express to work. Right now I'm using the on-board VGA for the display. I didn't think I needed a high-end display card just to run the service manager. Anyway I think you and I are seeing the same symptoms. I'm using 720 @ 30p.<br>
<br>
Jimmy<br>
<br>
-- <br>
Jimmy Miklavcic<br>
Multimedia Specialist<br>
<a href="mailto:Jimmy.Miklavcic@utah.edu" target="_blank">Jimmy.Miklavcic@utah.edu</a><br>
<br>
UNIVERSITY OF UTAH<br>
CTR FOR HIGH PERFORM COMPUTING<br>
155 SOUTH 1452 EAST RM 405<br>
SALT LAKE CITY, UT 84112-0190<br>
<br>
Office: 801.585.9335<br>
Fax: 801.585.5366<br>
<br>
<a href="http://www.anotherlanguage.org" target="_blank">http://www.anotherlanguage.org</a><br>
<br>
<br>
From: <a href="mailto:adhesionmusic@gmail.com" target="_blank">adhesionmusic@gmail.com</a> [mailto:<a href="mailto:adhesionmusic@gmail.com" target="_blank">adhesionmusic@gmail.com</a>] On Behalf Of Andrew Ford<br>
Sent: Tuesday, February 17, 2009 2:43 PM<br>
To: Jimmy Miklavcic<br>
Cc: <a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk" target="_blank">Mike.W.Daley@cs.cardiff.ac.uk</a>; Nathan Gardiner; ag- <a href="mailto:tech@mcs.anl.gov" target="_blank">tech@mcs.anl.gov</a><br>
Subject: Re: [AG-TECH] BlackMagic HDMI vic beta download<br>
<br>
Hi Jimmy,<br>
<br>
Did you try checking the HDMI input directly, via either Blackmagic Media Express or AMCap? If that works then we probably have the same problem - I can see the video fine in Media Express but vic just shows a black screen with any codec or size. Here we have the Blackmagic Intensity Pro cards with Sony HDR-SR11 cameras, which are AVCHD. Side note: I don't think the recording format makes much of a difference, just the specific video format, as in 1080i at a certain framerate.<br>
<br>
Nathan, is vic expecting a certain framerate? The format that worked with Media Express was 1080i @ 59.97. If it's only been tested with PAL so far, I would hazard a guess and say that the NTSC isn't using the right format/framerate in some way.<br>
<br>
--Andrew<br>
<br>
2009/2/17 Jimmy Miklavcic <<a href="mailto:jimmy.miklavcic@utah.edu" target="_blank">jimmy.miklavcic@utah.edu</a>><br>
<br>
Mike, it's great news that you have been able to get HIT Lab's vic to<br>
work. I haven't been so lucky. I have AVCHD (Panasonic AG-HMC150) video<br>
cameras. Mike I think that you have MPEG2 based HD cameras. Are yours<br>
Sony? Nathan, I don't think you tested with an AVCHD camera.<br>
<br>
All I get is black, which I think tells me that it sees the video card<br>
but not, the video stream. Mike, did you use 1080i/p or 720p?<br>
<br>
If anyone has any suggestions, I'm open.<br>
<br>
Jimmy<br>
<br>
<br>
-- <br>
Jimmy Miklavcic<br>
Multimedia Specialist<br>
<a href="mailto:Jimmy.Miklavcic@utah.edu" target="_blank">Jimmy.Miklavcic@utah.edu</a><br>
<br>
UNIVERSITY OF UTAH<br>
CTR FOR HIGH PERFORM COMPUTING<br>
155 SOUTH 1452 EAST RM 405<br>
SALT LAKE CITY, UT 84112-0190<br>
<br>
Office: 801.585.9335<br>
Fax: 801.585.5366<br>
<br>
<a href="http://www.anotherlanguage.org" target="_blank">http://www.anotherlanguage.org</a><br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:ag-tech-bounces@lists.mcs.anl.gov" target="_blank">ag-tech-bounces@lists.mcs.anl.gov</a><br>
[mailto:<a href="mailto:ag-tech-bounces@lists.mcs.anl.gov" target="_blank">ag-tech-bounces@lists.mcs.anl.gov</a>] On Behalf Of<br>
<a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk" target="_blank">Mike.W.Daley@cs.cardiff.ac.uk</a><br>
Sent: Tuesday, February 17, 2009 1:52 AM<br>
To: Nathan Gardiner<br>
Cc: <a href="mailto:ag-tech@mcs.anl.gov" target="_blank">ag-tech@mcs.anl.gov</a>; <a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk" target="_blank">Mike.W.Daley@cs.cardiff.ac.uk</a><br>
Subject: Re: [AG-TECH] BlackMagic HDMI vic beta download<br>
<br>
Hi Nathan<br>
Thanks otherwise all looking good.<br>
Not bad on bandwidth usage either.<br>
Mike<br>
<br>
<br>
</blockquote></blockquote>
<br>
<br>
<br>
Michael Daley M.Phil MBCS GCFA<br>
<br>
----------------------------------------------------------------<br>
This message was sent using IMP, the Internet Messaging Program.<br>
<br>
<br>
</blockquote>
<br>
<br></div></div><div><div></div><div class="Wj3C7c">
-- <br>
-------------------------<br>
Gurcharan S. Khanna, Ph.D.<br>
Director of Research Computing<br>
Office of the Vice President for Research<br>
<a href="http://rc.rit.edu" target="_blank">http://rc.rit.edu</a><br>
<br>
Assistant Research Professor, Ph.D. Program<br>
Golisano College of Computing and Information Sciences<br>
<a href="http://people.rit.edu/gskpop" target="_blank">http://people.rit.edu/gskpop</a><br>
<br>
Director, Interactive Collaboration Environments Laboratory,<br>
Center for the Advancing the Study of Cyberinfrastructure<br>
<a href="http://icelab.rit.edu" target="_blank">http://icelab.rit.edu</a><br>
---<br>
Rochester Institute of Technology<br>
1 Lomb Memorial Drive<br>
Rochester, New York 14623-5603<br>
Phone: 585-475-7504 ~ Cell: 585-451-8370<br>
Email: <a href="mailto:gurcharan.khanna@rit.edu" target="_blank">gurcharan.khanna@rit.edu</a><br>
<br>
</div></div></blockquote></div><br>