Hi Jimmy,<br><br>Did you try checking the HDMI input directly, via either Blackmagic Media Express or AMCap? If that works then we probably have the same problem - I can see the video fine in Media Express but vic just shows a black screen with any codec or size. Here we have the Blackmagic Intensity Pro cards with Sony HDR-SR11 cameras, which are AVCHD. Side note: I don't think the recording format makes much of a difference, just the specific video format, as in 1080i at a certain framerate.<br>
<br>Nathan, is vic expecting a certain framerate? The format that worked with Media Express was 1080i @ 59.97. If it's only been tested with PAL so far, I would hazard a guess and say that the NTSC isn't using the right format/framerate in some way.<br>
<br>--Andrew<br><br><div class="gmail_quote">2009/2/17 Jimmy Miklavcic <span dir="ltr"><<a href="mailto:jimmy.miklavcic@utah.edu">jimmy.miklavcic@utah.edu</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
Mike, it's great news that you have been able to get HIT Lab's vic to<br>
work. I haven't been so lucky. I have AVCHD (Panasonic AG-HMC150) video<br>
cameras. Mike I think that you have MPEG2 based HD cameras. Are yours<br>
Sony? Nathan, I don't think you tested with an AVCHD camera.<br>
<br>
All I get is black, which I think tells me that it sees the video card<br>
but not, the video stream. Mike, did you use 1080i/p or 720p?<br>
<br>
If anyone has any suggestions, I'm open.<br>
<br>
Jimmy<br>
<br>
<br>
--<br>
Jimmy Miklavcic<br>
Multimedia Specialist<br>
<a href="mailto:Jimmy.Miklavcic@utah.edu">Jimmy.Miklavcic@utah.edu</a><br>
<br>
UNIVERSITY OF UTAH<br>
CTR FOR HIGH PERFORM COMPUTING<br>
155 SOUTH 1452 EAST RM 405<br>
SALT LAKE CITY, UT 84112-0190<br>
<br>
Office: 801.585.9335<br>
Fax: 801.585.5366<br>
<br>
<a href="http://www.anotherlanguage.org" target="_blank">http://www.anotherlanguage.org</a><br>
<div class="Ih2E3d"><br>
<br>
-----Original Message-----<br>
From: <a href="mailto:ag-tech-bounces@lists.mcs.anl.gov">ag-tech-bounces@lists.mcs.anl.gov</a><br>
[mailto:<a href="mailto:ag-tech-bounces@lists.mcs.anl.gov">ag-tech-bounces@lists.mcs.anl.gov</a>] On Behalf Of<br>
<a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk">Mike.W.Daley@cs.cardiff.ac.uk</a><br>
</div><div><div></div><div class="Wj3C7c">Sent: Tuesday, February 17, 2009 1:52 AM<br>
To: Nathan Gardiner<br>
Cc: <a href="mailto:ag-tech@mcs.anl.gov">ag-tech@mcs.anl.gov</a>; <a href="mailto:Mike.W.Daley@cs.cardiff.ac.uk">Mike.W.Daley@cs.cardiff.ac.uk</a><br>
Subject: Re: [AG-TECH] BlackMagic HDMI vic beta download<br>
<br>
Hi Nathan<br>
Thanks otherwise all looking good.<br>
Not bad on bandwidth usage either.<br>
Mike<br>
<br>
</div></div></blockquote></div><br>