<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi!,<br>
<br>
A few months ago i mailed about this, back then the issue was with
using H.264 but now i'm getting it aswell with H.261, back then i
thought it was some problem with my PCI video capturers not being
"strong" enough to support H.264.<br>
<br>
This is the problem; i'm getting an error on the same console where i
launch my 'AGServiceManager' (see screenshot
<a class="moz-txt-link-freetext" href="http://i38.tinypic.com/f57odf.jpg">http://i38.tinypic.com/f57odf.jpg</a>), everything works fine for a while
but when i start getting those errors (it's on a bucle all the time)
the video from one of the capturers freezes completely (it isn't always
the same, it's just random).<br>
<br>
- I can give you some info about the hardware doing a 'lspci':<br>
<br>
<i>03:02.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)<br>
03:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)<br>
03:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)<br>
03:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)<br>
04:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)<br>
04:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)<br>
05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)<br>
05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)<br>
<br>
</i>- Doing a 'dmesg' i also get the next info (it's on a bucle aswell):<br>
<br>
<i>bttv1: SCERR @ 36ebd000,bits: HSYNC OFLOW FBUS SCERR*<br>
bttv1: SCERR @ 36ebd000,bits: HSYNC OFLOW FBUS SCERR*<br>
bttv1: SCERR @ 36ebd000,bits: HSYNC OFLOW FBUS SCERR*<br>
bttv1: timeout: drop=0 irq=3843417/3843418, risc=36ebd000, bits: HSYNC
OFLOW FBUS</i><br>
<br>
(....)<br>
It says bttv1 but as i said earlier can be any device.<br>
- I'm using VIC 2.8ucl1.4.0beta .<br>
- I'm also using V4L2, should i try with V4L instead?.<br>
<br>
Thanks,<br>
<br>
<br>
</body>
</html>