<br><font size=2 face="sans-serif">When trying to launch </font>
<br>
<br><font size=2 face="sans-serif">Bridge3.py --name (name) --location
(location)</font>
<br>
<br><font size=2 face="sans-serif">I get the following error</font>
<br>
<br><font size=2 face="sans-serif">Traceback (most recent call last):</font>
<br><font size=2 face="sans-serif"> File "C:\Programmi\AGTk-3\bin\Bridge3.py",
line 15,</font>
<br><font size=2 face="sans-serif"> from AccessGrid.Registry.RegistryClient
import Re</font>
<br><font size=2 face="sans-serif">ImportError: No module named Registry.RegistryClient</font>
<br>
<br><font size=2 face="sans-serif">For what concerns the second question,
which logs should you need in order to be able to understand the abnormal
behaviour of my AG3 client? </font>
<br><font size=2 face="sans-serif">I'll clean them up then do some try
and then i'll post them to you.</font>
<br>
<br><font size=2 face="sans-serif">Thank you,</font>
<br><font size=2 face="sans-serif">Faber B.</font>
<br>
<br>
<br><font size=2><tt>owner-ag-tech@mcs.anl.gov scritti il 22/05/2006 20.15.29<br>
<br>
> <br>
> <br>
> Fabrizio.Berdondini@prototipo.it wrote:<br>
> ><br>
> > Hi all,<br>
> ><br>
> > following my previous thread about bridging with AG3, I'd like
to <br>
> > point out it with two questions about bridging and the use of
unicast <br>
> > under AG3.<br>
> ><br>
> > 1) How would be possible to set up a bridge for an AG3 venue
server? <br>
> > Does it require a config file as for AG2.4? What is a "RegistryClient"?<br>
> You can run a bridge like so:<br>
> <br>
> Bridge.py --name NAME --location LOCATION<br>
> <br>
> There are some other options, too, which you can see by running <br>
> 'Bridge.py -h'. Of particular note is the<br>
> bridge port range, which you'll have to ensure is open for clients
to be <br>
> able to use it.<br>
> <br>
> > 2) AG3 features report that with AG3 bridge/unicast is allowed
for <br>
> > each room. I tried to enable unicast (here we are not able to
reach <br>
> > the mbone as far as now) in many public rooms, but nothing seems
to <br>
> > change. I noticed that the "bridges" option under the
"tools" menu of <br>
> > the VenueClient is always empty... so I was wondering if a bridge
<br>
> > inside there is needed in order to switch to unicast inside the
room.<br>
> <br>
> A bridge must appear in the list of bridges for a unicast connection
to <br>
> work. If you see 'No bridges available', you can<br>
> send your logfile to me so I can understand what is going wrong.<br>
> ><br>
> > OK, I know, just some more than really two questions but... anyway...<br>
> > thank you for your support,<br>
> > Bye,<br>
> > Faber B. <br>
> <br>
</tt></font>