<br><font size=2><tt>Thomas:</tt></font>
<br><font size=2><tt>I found and deleted/re-created many times both the
venueserver.dat and .cfg file. I still have the same trouble: the VenueManagementTool
doesn't allow me to add roles or personsl. The only existent role is "RegisteredPeople",
it's empty and (as mentionned before) I cannot add any person to it nor
create other roles.</tt></font>
<br><font size=2><tt>How can I address this problem?</tt></font>
<br><font size=2><tt>Thanx</tt></font>
<br><font size=2><tt>Faber B.<br>
<br>
> Fabrizio:<br>
> <br>
> This issue was addressed in other mail on the list. Have you
resolved it?<br>
> <br>
> AG3 will use the VenueServer.cfg and VenueServer.dat files in the
current <br>
> directory;<br>
> if those files are from AG2, they will still be used. You can
avoid this by <br>
> starting<br>
> from a different directory, or by moving these files to another directory.<br>
> <br>
> If you have any more trouble, please do let me know.<br>
> <br>
> Grazie,<br>
> Tom<br>
> <br>
> <br>
> On 2/16/06 10:42 AM, Fabrizio.Berdondini@prototipo.it wrote:<br>
> > <br>
> > I completely removed a previuous installation of AGtk-2.4 from
the <br>
> > machine (win2k) that hosted the venueserver, then installed AGtk
3 <br>
> > beta1. When I launched the Venue Server and the Venue Management
Tool it <br>
> > showed the same venues configuration I had under AG 2.4... Where
is this <br>
> > information stored? How can I remove it?<br>
> > <br>
> > owner-ag-tech@mcs.anl.gov scritti il 16/02/2006 15.45.18<br>
> > <br>
> > ><br>
> > > By the way, it seems that something's started "moving"
on my AGtk 3<br>
> > > server: I removed my certificated user (globus Identity
Certificate)<br>
> > > and installed a "service" certificate. Now
I can finally reach my<br>
> > > VenueServer via the VenueManagementTool. However there's
still<br>
> > > something strange: I went to the "manage security"
tag of my default<br>
> > > lobby venue in order to check the status of allowed
and disallowed<br>
> > > people/actions: in fact the section is empty, there's
only a<br>
> > > "Registered people" entry which contains
nothing (no ppl, no<br>
> > > actions). I tried to add some persons but no luck:
I can only add<br>
> > > roles but cannot fill them and so I cannot configure
any<br>
> > > people/action... maybe this is the reason why I cannot
enter the<br>
> > > venue with my client...<br>
> > > I'll try to "reset" the server configuration
and restart the<br>
> > > service... stay tuned ;-)<br>
> > > Thanx again for your attention and support,<br>
> > > Faber B.<br>
> > ><br>
> > > "Thomas D. Uram" <turam@mcs.anl.gov>
scritti il 16/02/2006 15.10.45<br>
> > ><br>
> > > > I'm not sure why it didn't get forwarded, but
will check. Meanwhile,<br>
> > > > you can put them in web space and point at them
with a url.<br>
> > > ><br>
> > > > Tom<br>
> > > ><br>
> > > ><br>
> > > > On 2/16/06 7:57 AM, Fabrizio.Berdondini@prototipo.it
wrote:<br>
> > > > ><br>
> > > > > It seems I'm no more able to send messages
to the mailing list... or<br>
> > > > > maybe I cannot send it with an attachment.
How can I post my <br>
> > server logs<br>
> > > > > with a message on the ml? Is there some
restriction?<br>
> > > > ><br>
> > > > > Thanx for suggestions<br>
> > > > > Faber B.<br>
> > > > ><br>
> > > > > owner-ag-tech@mcs.anl.gov scritti il 15/02/2006
16.29.18<br>
> > > > ><br>
> > > > > > Helllo Fabrizio:<br>
> > > > > ><br>
> > > > > > Can you send more of your logfile?
(Send to me personally if <br>
> > it's<br>
> > > > > very big.)<br>
> > > > > ><br>
> > > > > > This error should not be happening,
and I suspect it is somehow<br>
> > > > > related to<br>
> > > > > > server initialization that would
be reflected earlier in the <br>
> > logfile.<br>
> > > > > ><br>
> > > > > > Since you also had trouble with
VenueManagement, you could <br>
> > also include<br>
> > > > > > that logfile.<br>
> > > > > ><br>
> > > > > > Grazie,<br>
> > > > > > Tom<br>
> > > > > ><br>
> > > > > ><br>
> > > > > > On 2/15/06 9:15 AM, Fabrizio.Berdondini@prototipo.it
wrote:<br>
> > > > > > ><br>
> > > > > > > Hello all,<br>
> > > > > > > I'm trying to configure
venueserver and client on a WinXP <br>
> > machine in<br>
> > > > > > > order to have a look to
the new release of AGtk (for future<br>
> > > > > migration of<br>
> > > > > > > our current server/clients).
I installed all the packages<br>
> > > indicated on<br>
> > > > > > > the download link but I'm
not able to connect my client to <br>
> > the local<br>
> > > > > > > venueserver: the server
rejects the connection with the <br>
> > following<br>
> > > > > message:<br>
> > > > > > ><br>
> > > > > > > 02/15/06 16:11:51 3576 Security
<br>
> > authorizationmanager.py:216 DEBUG<br>
> > > > > > > Rejecting access from unidentified
user as part of Everybody <br>
> > role<br>
> > > > > > > 02/15/06 16:11:51 3576 Hosting
servicecontainer.py:16 <br>
> > ERROR Not<br>
> > > > > > > authorized None<br>
> > > > > > > 02/15/06 16:12:01 3572 VenueServer
venue.py:235 DEBUG <br>
> > Client<br>
> > > > > Timeout<br>
> > > > > > > Check: 1140016326 vs 1140016321<br>
> > > > > > ><br>
> > > > > > > I tried to modify the default
venue settings/permissions,<br>
> > > but I wasn't<br>
> > > > > > > able to connect to the venueserver
via the <br>
> > VenueManagementTool: it<br>
> > > > > > > simply tells me that it
cannot connect to the venueserver <br>
> > located at<br>
> > > > > > > https://localhost:8000/VenueServer
(the address is correct <br>
> > and if I<br>
> > > > > try<br>
> > > > > > > to reference the venueserver
with its IP or its full network <br>
> > name the<br>
> > > > > > > VenueManagementTools hangs).<br>
> > > > > > > Any suggestion?<br>
> > > > > > > Thanx,<br>
> > > > > > > Faber B.<br>
> > > > > ><br>
> <br>
</tt></font>