<html>
<font size=3>the LBL folks have built a network remote controller for
Sony &amp; Canon cameras as well:<br><br>
<a href="http://www-itg.lbl.gov/mbone/devserv/" eudora="autourl">http://www-itg.lbl.gov/mbone/devserv/</a><br><br>
--bob<br><br>
At 12:46 PM 1/30/2002 -0900, Bob Huebert wrote:<br>
<blockquote type=cite class=cite cite>Hi Satish,<br><br>
Remote control of our EVI-D30 Sony cameras was a lot easier than I
expected. While we don't have a 'ready-for-primetime' system, the Sony
EVI camera control software looks promising.<br><br>
The 'VISCA' cable is not very special, it just performs a connector
translation between the 'VISCA' 8pin mini din and a conventional d-shell
9pin serial connector. I wasn't able to find the command list or cable
information at Sony's site, but did find this reference:<br><br>
<a href="http://www.vision.auc.dk/~tbm/Sony/EVID30.pdf" eudora="autourl">http://www.vision.auc.dk/~tbm/Sony/EVID30.pdf</a>
This describes the cable construction and the command language understood by the EVI-D30.<br><br>
For a Sony EVI-D30, get the application (for windoze) at:<br>
<a href="http://bpgprod.sel.sony.com/BPC/docs/software/d30e.zip" eudora="autourl">http://bpgprod.sel.sony.com/BPC/docs/software/d30e.zip</a><br><br>
Hope this helps.<br><br>
-bob<br><br>
At 6:41 PM -0600 1/29/02, Satish Devarapalli wrote:<br>
<blockquote type=cite class=cite cite>Can some one suggest a vendor for getting the Camera control software and<br>
the visca cables. Can we daisy chain these cameras and connect them all<br>
to a single port ? If yes, do we use any separate cables for daisy chaining.<br>
(I see VISCA IN and OUT, so possibly we can daisy chain them).<br><br>
-Satish<br><br>
<br>
-- Original Message --<br><br>
<blockquote type=cite class=cite cite>David,<br><br>
We haven't played with the Tandberg Panel but have had some tech-talks</blockquote>with<br>
<blockquote type=cite class=cite cite>A/V firms that use AMX type panels.&nbsp; They are pretty nice but expensive<br>
to<br>
purchase and costly to install.&nbsp; From what we saw they didn't seem to add<br>
enough value for the money for the average Grid node.&nbsp; They may be<br>
appropriate though for a very high end location that will also serve other<br>
functions like the conference room you mentioned. Most of these systems<br>
allow you to control all aspects of the room - lighting, camera,<br>
projections, sound, drapes/curtains, etc - but require that the items to<br>
be<br>
controlled use devices that work with the companies panel.&nbsp; That's were<br>
it<br>
gets expensive.<br><br>
If you are looking to add camera control, the Sony and Cannon cameras have<br>
software which can run on the display machine to control the cameras.</blockquote>They<br>
<blockquote type=cite class=cite cite>connect up using a visca control cable in series through the cameras which<br>
then connects back into the serial port on the display machine or other.<br>
The cameras are IDed by the system and controlled individually, or through<br>
presets, by the software.&nbsp; It's actually pretty slick and the cost is pretty<br>
reasonable.<br><br>
<br>
Gary A. Refka<br>
INSORS Integrated Communications, Inc.<br>
111 W. Jackson Blvd., Suite 1412<br>
Chicago, IL 60604<br>
Email: grefka@insors.com<br>
On the Web: <a href="http://www.insors.com/" eudora="autourl">www.insors.com</a><br>
(847)922-8950<br><br>
-----Original Message-----<br>
From: owner-ag-tech@mcs.anl.gov [<a href="mailto:owner-ag-tech@mcs.anl.gov" eudora="autourl">mailto:owner-ag-tech@mcs.anl.gov</a>]On<br>
Behalf Of David E. Bernholdt<br>
Sent: Monday, January 14, 2002 9:03 AM<br>
To: Satish Devarapalli<br>
Cc: ag-tech@mcs.anl.gov; bernholdtde@ornl.gov<br>
Subject: Re: [AG-TECH] Tandberg Control panel<br><br>
<br>
On Fri, 11 Jan 2002 19:40:19 -0600&nbsp; Satish Devarapalli wrote:<br>
<blockquote type=cite class=cite cite>&nbsp;Has any used Tandberg Control Panel to control the cameras we use in</blockquote></blockquote>AG.<br>
<blockquote type=cite class=cite cite><br>
I am not directly familiar with the Tandberg control panel (though<br>
I've seen one), but my guess is that it uses AMX, an industry standard<br>
protocol for the control of A/V, lighting, etc. which is widely used<br>
in high-end conference rooms, lecture halls, etc.<br>
<br>
As AG becomes a more established and widespread tool, I expect that<br>
integration of AMX interface capabilities into AG would be interesting<br>
for some customers.&nbsp; For example: we're building some new buildings<br>
here shortly, and there will be a couple of connference rooms and<br>
lecture rooms which would be good candidates for AG nodes (not clear<br>
how many we'll have) and also good candidates to have AMX control<br>
systems (I don't know exactly what's planned in this respect).&nbsp; It<br>
would be nice if they could all play nicely together.<br><br>
On the other hand, given its nature, I suspect that AMX integration is<br>
more likely to come from A/V vendors who supply conference room<br>
systems and become interested in AG as an addition to their product</blockquote>&nbsp;&gt;line rather than the research community that currently dominates AG<br>
<blockquote type=cite class=cite cite>development.<br><br>
Just my opinion.<br>
--<br>
David E. Bernholdt&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; |&nbsp;&nbsp; Email: bernholdtde@ornl.gov<br>
Oak Ridge National Laboratory&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; |&nbsp;&nbsp; Phone: +1 (865) 574 3147<br>
<a href="http://www.csm.ornl.gov/~bernhold/%A0%A0" eudora="autourl">http://www.csm.ornl.gov/~bernhold/&nbsp; </a> |&nbsp;&nbsp; Fax:&nbsp;&nbsp; +1 (865) 574 0680<br><br>
</blockquote></blockquote><br>
-- <br>
_________________________________________________<br>
Bob Huebert email: huebert@arsc.edu<br>
HPC Visualization Systems Analyst&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; voice: (907) 474-5751<br>
ARSC University of Alaska Fairbanks&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; FAX: (907) 474-5494<br>
</font></blockquote></html>