<html>
At 01:57 PM 4/24/2000 -0500, Rogier, Gordon wrote:<br>
<blockquote type=cite cite>Olson and Nickless, when can we move VV space
to glop addresses in the ANL<br>
space 233.2.177.0/24? I want to make reviewing mcast router state
simpler!!<br>
<br>
I would like to recommend a layout of sets of 4 sequential address per
VV<br>
room. The desire for sequential addresses is to ensure clean
mapping to<br>
layer 2 mcast transport as well as discrete acl configuration for
rate<br>
limit, etc. if so needed by a campus. Eg.,</blockquote><br>
Sounds like a good plan. I'll try to go ahead and make the changes, when
I get a chance to do it (we're gearing up for paper and site visit
panics).<br>
<br>
I assume you mean to have sequential addresses for all of the room
ranges...<br>
<br>
<blockquote type=cite cite>Olson and I did a test quite a while back and
satisfied his at a glance<br>
concern if glob addresses worked. I think he is
satisfied.</blockquote><br>
<br>
Yup, seems to Just Work. (Reason I was skeptical before is that we had
some problems a couple years ago with admin-scope multicast where we had
to explicitly route add the multicast LIS...)<br>
<br>
--bob</html>